AmazonBasics B07T2C9BTT Bedienungsanleitung Seite 7

Filling the water tank
I-JUCO
Carefully remove the honeycomb filter on the back side of the
•
product (Detail 1).
Open the water filling lid on the top of the product (Detail 2).
•
Fill the bottom water tank with water (Detail 3).
•
The water level must be above
mark.
The water level markings are located at the tank window on the front
side of the product.
Put the honeycomb filter back in position. Make sure that the magnet
on the upper part of the honey comb frame has contact with the
product.
With the honeycomb filter in place, you can still add water through
•
the top water tank (Detail 4).
A WARNING
Risk of electric shock! To prevent electric shock,
unplug the product before filling the water tank.
For an extra cooling effect of the EVA./COOLER function,
add ice cubes into the top water tank.
The air cooler only operates when the honeycomb filter is
properly installed.
The EVAJCOOLER
water level is below the MIN
A CAUTION
Risk of product damage! Do not add any fragrances or
aromatic Oils to the water tanks.
the MIN mark and below
function is not available
mark.
the MAX
when the
EN
7