cecotec AIRFORCE 2IN1 MULTIFUNCTION Bedienungsanleitung Seite 8

any liquid that leaks from the battery. If the liquid gets into
contact with skin, wash immediately with soap and water.
If the liquid gets into the eyes, wash them immediately with
clean water for a minimum of 10 minutes and seek medical
attention. Wear gloves to handle the battery and dispose of
it immediately in accordance with local regulations.
- Avoid contact between the battery and small metallic
objects such as paper clips, coins, keys, nails, or screws.
IMPORTANT
READ CAREFULLY BEFORE USE.
KEEP FOR FUTURE REFERENCE.
1. Training
a) Read the instructions carefully. Familiarise yourself with
the correct use and operation of the tool.
b) Never allow people unfamiliar with these instructions
to use the tool. Local regulations may restrict the age of
the operator.
c) Please note that the operator or user is responsible for
accidents or hazards that may occur to other people or
their property.
2. Preparation
a) Wear ear protection and safety goggles. Always wear
them while using the tool.
b) Always wear sturdy footwear and long trousers while
operating the tool. Do not operate the tool barefoot
or wearing open sandals. Avoid wearing loose-fitting
clothing or clothing with dangling laces or ties.
c) Do not wear loose clothing or jewellery that can be
sucked in through the air inlet. Keep long hair away from
the air inlet.
14 AIRFORCE 2IN1 MULTIFUNCTION
d) Use the tool in the recommended position and only on a
firm and level surface.
e) Do not operate the tool on a paved or gravel surface, as
ejected material could cause injury.
f) Before use, check the power cord and extension cord for
signs of damage or wear. If the cord is damaged during
use, disconnect it from the power supply immediately.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE
POWER. Do not use the appliance if the cord is damaged
or worn.
g) Never operate the tool while people, especially children,
or pets are nearby.
3. Operation
a) Keep your feet firmly on the ground and always maintain
proper balance. Do not lean forward. Never stand at a
higher level than the base of the tool when using it.
b) Stay away from the material to be blown when using the
tool.
c) Keep the battery compartment and connections free
of dust and debris to ensure efficient operation and
prevent overheating that could damage the battery.
d) Do not transport the tool while it is connected to a power
socket.
e) Stop the tool and remove the battery. Make sure all
moving parts have come to a complete stop before
putting down the tool, clearing obstructions, unclogging
the duct, or checking, cleaning, or performing any
maintenance.
f) Do not tilt the tool while it is connected to a power
socket.
AIRFORCE 2IN1 MULTIFUNCTION 15