SPEEDLINK QUAD Bedienungsanleitung Seite 4

EN
INSTRUCTION:
1. First plug the DC connector into the QUAD charging station.
2. Then plug the USB-A connector into the USB port on your
Nintendo Switch* dock and switch on the charging station.
3. Now slot the original Nintendo Switch* Joy-Cons* or the original
Pro Controller, which you want to charge, into the charging station.
4. The charging LED will glow red if the Joy-Cons*
and/or the Pro Controller are not fully charged;
once they are, the indicator will glow green.
PLEASE NOTE:
• Only operate the product using the supplied USB cable.
• The supplied USB cable must only be used
with the original QUAD charger.
• The charging station can only be used to charge original
Nintendo Switch* Joy-Cons* or the original Pro Controller.
• Once the Joy-Cons* and/or the Pro Controller are fully charged,
remove them from the charging station.
• Insert the Joy-Cons*/the Pro Controller carefully
into the charging station to avoid damage.