Levelling - Exquisit Fd5490-160-Ws-202E Inoxlook-Az Gebrauchsanweisung

Setting up and connecting
Minimum clearances for ventilation
Air circulation at the rear, side and top of the appliance influences energy consumption
and refrigerating/freezing performance (depending on model). It is essential that the
minimum clearances for ventilation of the appliance are observed as shown in the
following drawing. If the minimum clearances are not observed, the accumulated air
cannot escape and the compressor is in continuous operation, which shortens the life of
the appliance.
Appliance dimensions in mm and degrees
a b
836 706
Ø Failure to observe the minimum distances increases power
Ø If the accumulated heat cannot dissipate around the appliance, the
Ø To achieve the specified energy class, comply with the above
Ø Do not install refrigerator/freezer combinations with only one

10.2 Levelling

If the surface is slightly uneven, level the appliance with the
front feet.
b2 c
1084 1830
consumption.
function of the appliance will be impaired.
mentioned clearances.
temperature regulator in refrigerated rooms below 16 °C
Page 32 of 48
d e
100 50
f g h
50 149° 763