GlareOne LED RC Gebrauchsanleitung Seite 6

PARTS
1. Battery level indicator
2. Lighting effect
3. Light output (brightness)
4. +/- adjusting selected operating parameter
5. Light effect start/stop
6. GR/CH -group/channel
7. ON/OFF switch
8. Light color temp./stand-by mode
9. Light color temp. indicator
10. Group indicator
11. Channel indicator
Handling
ON/OFF - press button (7) for 2s.
Communication channel - press button (6) once and set channel number by pressing +/- (4).
Remote and light must be assigned to the same wireless channel to enable communication
between devices.
Group - press button (6) twice and set group number by pressing +/- (4).
Light output (brightness) - select a group, then use +/- to change the setting.
Color temperature adjustmet - select a group, then press (8) and use +/- to change the
setting.
Stand-by mode - select a group, then press and hold (8) for 2s (all lights in selected group will be
set to 0% brightness).
Lighting effects - press and hold button (5), then select the effect by pressing +/- (4) To
start/stop the effect, press (5) once.
Information regarding configuration of specific light may be found in it's instruction manual.
6