Initial Setup; Changing The Input Source - Samsung PS43F4900 Benutzerhandbuch

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
✎
Some functions which require a PIN code may not be available.
✎
The product colour and shape may vary depending on the model.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push the
controller in first it will not move in the up/down/left right directions.
The image is drawn by facing the front side
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric
power is still consumed even when the power button is turned off. It is best to unplug the power cord.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP
button. Setup is available only when the source is set to TV.
If You Want to Reset This Feature...
You should do Setup (MENU
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0" (except France). If you want
to change the PIN number, use the Change PIN function.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
"0-0-0-0" (France: "1-1-1-1"):
Source
TV / Ext. / HDMI1 / HDMI2/DVI / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
✎
Press the SOURCE
✎
PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable with the
2(DVI) port on the TV.
✎
Ext. always stays activated.
✎
Press the TOOLS button.
• Edit Name
You can set an external input source name you want.
– When connecting a PC to the
– When connecting a PC to the
Edit Name.
– When connecting an AV devices to the
mode under Edit Name.
• Information
You can see detailed information about the connected external device.
[PF4900-XNZF]BN68-04783E.indb 6
Using the TV's Controller (Panel Key)
TV Controller
of the TV.
Remote control sensor

Initial Setup

→ System) again at home although you did in shop.
(off) → → 8 → 2 → 4 →
POWER MUTE

Changing the Input Source

button. In the displayed Source list, connected inputs will be highlighted.
HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
port with HDMI to DVI cable, you should set the TV to DVI PC mode under
HDMI IN 2(DVI)
HDMI IN 2(DVI)
Selecting the Media Play
Selecting the Menu
Return
Power off
Function menu
POWER (on).
port with HDMI to DVI cable, you should set the TV to DVI Devices
English - 6
Selecting a Source
HDMI IN
2013-01-23 1:52:40