Initial Setup; Selecting The Video Source; Password Change - Samsung UE110S9 Benutzerhandbuch

Initial setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process, including the selecting the menu language,
scanning channels, connecting to the network, and more. During each step, either make a
choice or skip the step. You can manually perform this process at a later time in the
menu.
Setup
- If you connect any device to before starting the installation, the
HDMI1
be changed to Set-top box automatically.
- If you do not want to select Set-top box

Password Change

>
System Change PIN
Changing the TV's password.
1. Run and then enter the current password in the password field. The default
Change PIN
password is "0-0-0-0".
2. Enter a new password and then enter it again to confirm it. The password change is
complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to
"0-0-0-0":
For the Standard Remote Control: In Standby mode:
For the Samsung Smart Control: When the TV turns on:
→ Volume down → → Volume up →
RETURN
System
Channel Source
, please select Aerial .
→ 8 → 2 → 4 →
MUTE POWER
→ Volume up →
MUTE
RETURN

Selecting the video source

You can select a connected external device using the
For example, to switch to a gaming console connected to the second HDMI connector,
press . From the
SOURCE Source
>
Connector names may vary depending on the model.
The following options are available in the
will
Button
TOOLS
Select a port connected to an external device, and press and hold the Enter button. The
following functions are available:
- Available options for each connector may vary.
Edit Name
Rename devices connected to the TV for easier identification of external sources.
For example, you can designate a computer connected to the TV via an HDMI-DVI cable as
.
DVI PC
Alternatively, simply designate a computer connected to the TV via an HDMI cable as
You can also designate an AV device connected to the TV via an HDMI-DVI cable as
Devices .
Information
View detailed information about the connected devices.
(On)
RETURN
Anynet+ (HDMI-CEC)
Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are connected to the TV.
- This option is only available when
Disconnect USB Device
Used to safely remove a USB device connected to the TV. This option is only available when
a USB device has been selected.
English - 14
SOURCE button.
list, select to change the input signal to HDMI mode.
HDMI2
Source screen:
Anynet+ (HDMI-CEC) is On .
PC .
DVI