Product Specifications - Meross Ms600 Bedienungsanleitung

people leave the space, allowing usersto set Scene, such as automatically
turning off air conditioning in an office area after a certain time of absence to
save energy.
5. Sensitivity Recommendations
If there are no interferences in the detection area, such as fans or pets, consider
enabling "Security" mode to exclusively use radar for detecting presence and
absence, which reduces detection delay and increases sensitivity.
The detection range can be adjusted between 1and 12 meters in Device
Settings > Detection range calibration, allowing you to customize it according
to your specific needs. Note that movements outside your set detection range
will not be detected.
• Buttons, Indicator
Mode
Reset/lnitialize
Fi"nware Upgmde
Activate Network
Network Setup Successful
Pairing
No Network
unoccupied to occupied
Space Learn ing

• Product Specifications

Model: MS600
Input: sV IA, Type-C
Radar Frequency: 24GHz(lSM)
Light Sensor Range: 0-80001ux
Detection Range: Presence S6m, Motion S12m
Temperature
Humidity Operating
Lights, Functional Instructions
Press the button
hold
Setup/Matter
state
Operating Range:
Range: 20-95% RH non-condensing
Button Action
and power on,
the button for S seconds
None
None
None
None
None
None
Double -Click
LED
Amber, green light. cyclic flashing
Amber light Stays on
Amber. green light. cyclic flashing
Green light stays on for
second then tums
Green blinking
Red light stays
Green flashes once
Green light stays on
off