Shimpo RK-3E Bedienungsanleitung Seite 5

Do not move or hold the wheel
while power is on.
The wheel cabinet may start turning and your
hand may be caught between the wheelhead
and the enclosure.
Do not lift the wheel by the
wheelhead.
May cause damage or injury.
Place the wheel on a flat,
horizontal surface.
It may cause a vibra-
tion if the placement
is not level.
Do not remove the bottom cover.
There are electrical parts which need to
be protected from hands, water and other
materials.
Be careful of loose fitting clothing
and long hair.
May catch in clay or wheelhead causing
damage or injury.
Be careful of jewelry and long
nails.
Jewelry may catch in equipment and
cause damage or injury. Nails may
be broken.
Do not remove the bolts for
installation of the ball mill
rack.
Water may reach the circuit board and
cause damage to the product.
Do not place a TV, radio, or an
antenna to close to the wheel.
It may cause noise and picture distortion.