Create Iron Dual Pro Bedienungsanleitung Seite 9

2. Plug the power cord into a 220-240V~ 50-60Hz power
outlet, and the LED indicator on the front cover will flash red,
entering standby mode.
3. Remove the iron from the main body. Touch the function button, the indicator light will
continue to flash red and the dry ironing mode indicator will start flashing. The machine
will enter preheating mode and the heating element will start to operate.
4. When the preheating is finished, the indicator light will change to steady blue, the dry
ironing mode icon will stay on and the cotton/linen mode indicator will flash.
IRONI NG MODE S
1. Once preheating is complete, while the cotton/linen mode indicator is flashing, press and
hold the steam activator until the cotton/linen indicator stops flashing and remains lit.
Steam will start to come out. Release the trigger to stop steaming and the cotton/linen
mode indicator will flash again.
2. When the cotton/linen mode indicator flashes, press the function button again. The blend
mode indicator will flash and the cotton/linen mode indicator will turn off. At this point,
press and hold the steam activator and the blending mode indicator will remain on. Steam
will start. Release the trigger to stop steaming and the blend mode indicator will flash
intermittently again.
3. When the blending mode indicator flashes, press the function button again, the silk mode
indicator will flash and the blending mode indicator will go off. At this time, press and hold
the steam activator, the silk mode remains on and steam starts. Release the trigger to stop
steaming, and the silk mode indicator flashes again.
MODE PREHEATING
PREHEATING
E NGLI SH
FINALIZED
9