Care And Maintenance; Fcc Information - Bionik Pro Kit Bedienungsanleitung

feature, and bu simplu plugging in the 3Srnm jack for sound
l. Plug the headphone lack from the headset into the port on
gour controller Adjust the volume wheel on the in-line
control box to set gour desired level. The mute settlng can
also be set on the in-line
2. If wou wish to utilize the RGB LED feature, plug the L.ISB
connector from the headset into an available USB power
. SOI_Jrce If needed, gou can use the included USB extension
cable to reach the ports an gaur console (FIG 7)
3. This headset features a built-in microphone Please make
sure that the headset is worn correctlu according to the R
and L indicators
4. Follow gaur console's instructions regarding the use Ofchat
features, and proper procedures for using a headset. Check
gour console's options for further settings and features
available
CARE AND
• Keep awau from fire and high temperatures. Never dispose
of in fire Alwaus recucle all electronics and batteries
• Clean with dru a cloth
• Avoid knots in the cable, and store cable neatlu using the
attached cable wrap
• Discontinue use if
contact our customer service for help and additional info We
are alwaUS happu to help and stand fullu behind our
products

FCC INFORMATION

Warning: Changes or modifications to this unit not expresslu
approved bu the partu responsible for compliance could void
the user's authoritu to operate the equipment
NOTE: This equipment has been tested and found to complu
with the limits far a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference nna residential
installation This equipment generates, uses and can radiate
radio frequencu energu and, if not installed and used In
accordance with the instructions, mau cause harmful
interference to radio
However, there is no guarantee that interference will not occur
in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be
determined hu turning the equipment off and on, the user is
encouraged to tru to correct the interference bu one or more of
the following measures.
control
so that the mic faces
MAINTENANCE
suspect there is a malfunction. Please
communications.
box.
the
7
user