Bionik Pro Kit Bedienungsanleitung Seite 7

ENCUSH
Thank gou for purchasing this bionic gaming product.
Our goal is to deliver high-quality,
that amplify
guide and store it or future
rec cle. user guides can also be downloaded
we site at www.bionikgaming.com.
CHARGE BASE INSTRUCTIONS
1 Centluuncoil the USB cablefrom the bottom of the dock
Vou can adjust the cable length bu how much of the cable
uou uncoil Insert the cable Into the cable slot (FIG l)
Connect the USB cable to an available port on gour console
2.
or another USB power supplu with an output of 5V IA
3. Remember that gour console's USB ports mau not be
active when off or In standby mode If gou wish gaur
controllers to charge even when the console is off or in
stand bu then uou will need to adjust the power settings of
gour console. Please follow gour console Instruction manual
to activate the power to the USB ports,
4. Remove the batteru covers and anu batteru cells from gour
controllers (FIG 2)
5 nsert one of the Included rechargeable batteru packs into
the batteru compartment, making sure that the "THIS SIDE
IJP" label an the battery pack is facing the top of the
controller (FIG B),
6. Replace the batteru cover wi h one of the included batteru
covers (FIG 4)
7. Align the dock's connector to the charge port on the top of
the controller and gentlu connect the controller to the
ChargeBase(FIG.5). No force is required,and the controller
should engage with the dock with minimal effort, A back-lit
icon depicting a controller will appear on the Charge Base
screen to indicate that the controller is charging While
charging,the Iconwill remain on (FIG 6). Oncethe controller
is fullu charged, the corresponding icon will turn off to
indicate that the controller is fullg charged
8 You can store the Charge Base when not in use, Centlu
wrap the USB cable on the built-in spool on the bottom of
the base and secure the USB connector (FIG 1).
USING CLR-50
NOTE: Headset mau be used with all devices that support
3 5mrn headphone jack and is not exclusive to gaming
console use USB power is only required for the RGB LED light
feature The headset mau be used without utilizing this
your aming experience.
innovative
Please review this
reference. Otherwise,
6
accessories
please
from our