Important Safeguards; Important Safety Instructions - Sony LF-PK1 Kurzanleitung

Important Safeguards

Contacting Sony
If, after reading these operating instructions, you have additional
questions related to the use of your Sony LocationFree Base Station,
contact Sony Customer Information Centre. For more contact information,
refer to the EUROPEAN GURANTEE INFORMATION DOCUMENT.
http://www.sony.net/Products/LocationFree/support/

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
12) Unplug this apparatus during lightning storms or when unused for
long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
14) Please make sure that the socket outlet is easily accessible.
15) If you use a pacemaker or other medical device, consult your
physician or the manufacturer of your medical device before using the
wireless LAN function.
16) Do not connect inappropriate network or phone lines to the LAN port.
Connect only 100BASE-TX/10BASE-T cables to the LAN port. For
help on connecting to a network, see your network administrator.
17) TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
GB
Continued
1 (GB)