Sony LF-PK1 Kurzanleitung Seite 20

Notes
• Even if the power turns on and off correctly with [Power],
other buttons may not be enabled. If this happens, select
[Video 1] or [Video 2] from the Index. With the on-screen
remote control, confirm that the buttons are enabled.
• Try all items of the type in [Type] box to select the most
suitable on-screen remote control for the connected devices.
• The button names or button numbers of the on-screen remote
control may differ from those of the remote supplied with
your device.
• For the latest version of the on-screen remote control data,
see the LocationFree Support web site at http://www.sony.
net/Products/LocationFree/support/.
3
Click [OK] to close the [Settings] window.
Click anywhere inside the window, then click the type of
the connected external device. Click [Remote], then the on-
screen remote control appears.
16 (GB)
Configure the colour system for video
■
(For watching PAL/SECAM/PAL60/NTSC video)
1
Click anywhere inside the window, and then
click [Settings] at the bottom right of the
window.
2
Select [Video Settings] and then [Colour
System Settings].
Select the colour system.
3
Select a colour system, and then click [OK].
After you change the colour system settings, the NetAV
connection will be disconnected and then it will be
reconnected automatically.