Herunterladen Inhalt Inhalt Diese Seite drucken
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
BEDIENUNGSANLEITUNG
OPERATING INSTRUCTIONS
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Reboots GO X

  • Seite 1 BEDIENUNGSANLEITUNG OPERATING INSTRUCTIONS...
  • Seite 2: Vorbemerkung

    VORBEMERKUNG Herzlichen Glückwunsch zum Kauf dieses Geräts! Du wirst viel Freude damit haben! Wenn du mit deinem Reboots Produkt zufrieden bist, würden wir uns sehr über deine Empfehlung freuen. Diese Anleitung beinhaltet Details, die vom Nutzer beachtet werden sollen, um Gefahren vorzubeugen und das Gerät sicher zu nutzen.
  • Seite 3: Überblick Steuergerät

    ÜBERBLICK STEUERGERÄT Batterie Statusanzeige Druckanzeige LED Statusanzeige (rot / blau / grün) (Quick-)Start- / Pause Ein- / Aus Druck vermindern / erhöhen Tastensperre Anschlussbuchse Anschlussbuchse Pumpen linkes Bein Pumpen rechtes Bein USB-C Ladebuchse...
  • Seite 4: Überblick Led Statusanzeige

    Kapitel ● ● ● verbunden Bluetoothverbindung “Fehlerbehebung” und kontaktiere bei Bedarf LED-Statusanzeige pulsiert grün: Hinweis: unseren Support Go X führt dein gewünschtes du kannst das Go X auch ohne ● ● Programm aus Smartphone mit eingeschränktem Funktionsumfang nutzen...
  • Seite 5: Überblick Pump-Einheit

    ÜBERBLICK PUMP-EINHEIT Setup - Button Dreh - Verschluss PUMP-EINHEIT VORDERSEITE PUMP-EINHEIT RÜCKSEITE Auf der Vorderseite erkennst du einen Auf der Rückseite erkennst du den Dreh-Verschluss ● ● Setup-Button Solltest du eine Pumpe austauschen müssen, kannst du ● dieser wird nur in Service-Fällen benötigt (siehe diese einfach von den Pants lösen, in dem du sie um 90°...
  • Seite 6: Überblick Über Die Go X Programme

    ÜBERBLICK ÜBER DIE GO X PROGRAMME MASSAGEPROGRAMME A-H: Die Luftkammern der Reboots Go X Pants werden entsprechend des gewählten Programms befüllt. So entsteht eine optimale gleitende Druckwellenmassage für ein erholsames Gefühl an beiden Beinen. Dauer und Druck, sowie sämtliche optionalen Zusatzfunktionen, können auch während der Massage noch verändert...
  • Seite 7 DEINE ERSTE ANWENDUNG - WIE ZIEHE ICH DIE PANTS AN? EINSTIEG: Am Einfachsten ist es, wenn du deine Reboots Go X Pants auf den Boden legst. Öffne für einen bequemen Einstieg die Reißverschlüsse ungefähr bis zum Beginn des Fußteils. Lege dich anschließend in die Reboots Go X Pants und schließe die Reißverschlüsse.
  • Seite 8: Grösse Deiner Reboots Pants

    GRÖSSE DEINER REBOOTS PANTS 2.0 PANTS L PANTS M...
  • Seite 9: Deine Erste Anwendung

    Tipp: Zum Schutz vor Verunreinigungen empfehlen wir das Tragen einer dünne Anschluss, da sonst dein Go X Jogging-Hose bzw. Leggings. Achte auf leere Hosentaschen. Schließe außerdem die Steuergerät unbrauchbar werden Reißverschlüsse der Reboots Go X Pants komplett, um ein plötzliches Öffnen zu kann. vermeiden.
  • Seite 10: Deine Möglichkeiten Mit Der Reboots App

    ● deaktivieren. DEFAULT PROGRAM DEM QUICKSTART-BUTTON ZUWEISEN Falls es schnell gehen muss und du ohne dein Smartphone dein Reboots Go X ● mit deinem Lieblings Reboots-Programm nutzen möchtest, kannst du dieses aus einer Liste wählen. Nachdem du das Reboots Go X Steuergerät neu gestartet hast, ist dein Lieblingsprogramm gespeichert und wird aktiviert, sobald du Start drückst - auch ohne dein Smartphone.
  • Seite 11: Timer Einstellen

    DEINE MÖGLICHKEITEN MIT DER REBOOTS APP TIMER EINSTELLEN Wähle die Dauer, über welche das Programm laufen soll (5-99min) ● HOLD - TIMER EINSTELLEN (HOLD) Hält den Zieldruck über einen definierbaren Zeitraum in der / den aktiven ● Kammern Der Hold-Timer beginnt bei Erreichen des Zieldrucks der Kammer(n) ●...
  • Seite 12: Individuellen Zieldruck Je Kammer Einstellen

    DEINE MÖGLICHKEITEN MIT DER REBOOTS APP INDIVIDUELLEN ZIELDRUCK JE KAMMER EINSTELLEN IM BEARBEITEN MENÜ IM LAUFENDEN PROGRAMMBETRIEB In jedem Programm kannst du den Druck je Kammer über Hast du das Programm bereits gestartet, kannst du den Druck je den horizontalen Regler einstellen. Ist das Schloss-Symbol Kammer einfach ändern, in dem du die entsprechende Kammer...
  • Seite 13: Beenden Der Anwendung

    PROGRAMM / SEQUENZ WURDE MANUELL BEENDET: Hast du die laufende Session über die App oder das Start-Pause oder am Reboots Go X Steuergerät durch langes Drücken von Ein-Aus beendet, schalten die Pumpen ab und entlassen die Luft, so dass du aussteigen kannst.
  • Seite 14 #4 DIE LED-STATUSANZEIGE DES REBOOTS GO X LEUCHTET STETIG ROT Das Reboots Go X Steuergerät erkennt einzelne oder alle Pump-Einheiten nicht. Die Ursache kann sein, dass du die Kabelanschlüsse der Beine versehentlich falsch herum in die Anschlussbuchsen gesteckt hast. Dies kann zu einem schweren Fehler im Reboots Go X Steuergerät führen.
  • Seite 15: Erweiterungen Für Dein Reboots Go

    ERWEITERUNGEN FÜR DEIN REBOOTS GO X UMFANGSERWEITERUNG Sollte der Umfang deiner Reboots Go X Pants zu klein sein, bemerkst du das, weil du die Reißverschlüsse nicht oder nur unter großer Anstrengung schließen kannst. Für diesen Fall kannst du mit unseren Erweiterungen weitere Größenabstufungen realisieren.
  • Seite 16: Lieferumfang & Technische Daten

    Abmessungen [in cm] 10 x 7,7 x 7,8 Schutzklassen IP21; II/ Temperaturbereich [in °C] 10 - 40 (Betrieb & Lagerung) Luftfeuchtigkeit [in %] 30-85 Pump-Einheit (16 Stück, Go X pants (S/M oder L) (Betrieb & Lagerung) vorinstalliert) Materialzusammensetzung (Manschetten) Nylon mit Polyamidfasern...
  • Seite 17: Sicherheitshinweise

    Versuche nur mangelhaft ausfallen, oder auch ein stehen wir dir unter der Rufnummer +49 (0) 666 174 891 06 oder Ersatzgerät mit einem vom Hersteller zu vertretenden Mangel behaftet hallo@reboots.de gerne zur Verfügung. sein, hat der Kunde Recht auf Wandlung oder Minderung.
  • Seite 18: Haftungshinweis

    HAFTUNGSHINWEIS HINWEIS: Verwende dein Reboots Produkt optimalerweise nur nach Rücksprache mit deinem Arzt. Dein Reboots Produkt ist kein medizinisches Gerät und dient nicht zur Selbstbehandlung. Bei Unsicherheiten frage bitte Mögliche Kontraindikationen können sein: Dekompensierte deinen Arzt. Herzinsuffizienz, Herzleistungsstörungen mit Wasser in den Beinen, Entzündungen...
  • Seite 19 OPERATING INSTRUCTIONS...
  • Seite 20: Preliminary Note

    PRELIMINARY NOTE Congratulations on purchasing this device! You will have a lot of fun with it! If you are satisfied with your Reboots product, we would be delighted to receive your recommendation. These instructions contain details that should be observed by the user in order to prevent hazards and use the device safely.
  • Seite 21 CONTROL UNIT OVERVIEW Battery status indicator Pressure indicator LED status indicator (red / blue / green) (Quick) Start / Pause On / Off Decrease / increase pressure Key lock Left leg pump connection Right leg pump socket connection socket USB-C charging socket...
  • Seite 22 The LED status indicator lights up solid green: blue: red: Go X is ready for use Go X is ready for use Go X is not ready for use ● ● ● Go X is connected to your Go X is searching for a See the “Troubleshooting”...
  • Seite 23 PUMP UNIT OVERVIEW Setup button Twist lock PUMP UNIT FRONT PUMP UNIT BACK On the front you will see a setup button On the back you will see the twist lock ● ● This button is only needed when servicing (see If you need to change a pump, you can simply detach it ●...
  • Seite 24 GO X PROGRAM OVERVIEW MASSAGE PROGRAM A-H: The air chambers in the Reboots Go X Pants are filled according to the selected program. This creates an optimal gliding pressure wave massage for a relaxing feeling on both legs. The duration and pressure, and all optional...
  • Seite 25: Getting Started

    USING THE PANTS FOR THE FIRST TIME - HOW TO PUT THE PANTS ON GETTING STARTED: The easiest way to get started is to lay your Reboots Go X Pants down on the floor. Open the zippers approximately to the beginning of the foot section for easy entry. Then lie down inside the Reboots Go X Pants and close the zippers.
  • Seite 26 REBOOTS PANTS 2.0 SIZE PANTS L PANTS M...
  • Seite 27 Tip: To protect against soiling, we recommend wearing thin jogging pants or leggings. very careful connect Make sure your pants pockets are empty. Also completely close the zippers of the correctly, otherwise your Go X Reboots Go X Pants to prevent them from opening suddenly. Control Unit may become unusable.
  • Seite 28 If you don’t want to use the Initial Phase, you can of course deactivate it. ● ASSIGNING A DEFAULT PROGRAM TO THE QUICK START BUTTON If you need to get started quickly and want to use your Reboots Go X with your ● favorite Reboots program without using your smartphone, you can select your favorite program from a list.
  • Seite 29: Set The Timer

    YOUR OPTIONS WITH THE REBOOTS APP SET THE TIMER Select the running time for the program (5-99 min.) ● SET THE HOLD TIMER (HOLD) This holds the target pressure in the active chamber(s) for a defined period ● The hold timer will start when the target pressure in the chamber(s) is reached ●...
  • Seite 30: In The Edit Menu

    YOUR OPTIONS WITH THE REBOOTS APP SET THE INDIVIDUAL TARGET PRESSURE FOR EACH CHAMBER IN THE EDIT MENU WHEN OPERATING THE PROGRAM In each program, you can set the pressure for each chamber If you have already started the program, you can easily change by using the horizontal slider.
  • Seite 31 To store your Reboots Go X Pants, fold them loosely together. Follow the storage instructions on the next page. CLEANING: All you need to clean the Reboots Go X Pants is a damp cloth with a gentle cleaning agent. Allow the Reboots Go X Pants to dry thoroughly.
  • Seite 32 #4 THE LED STATUS INDICATOR FOR THE REBOOTS GO X IS LIT UP SOLID RED The Reboots Go X Control Unit is not detecting individual pump units or all pump units. You may have accidentally plugged the cable connections on the legs into the connection sockets the wrong way around. This can lead to a serious error in the Reboots Go X Control Unit.
  • Seite 33 INCREASING THE WIDTH If the width of your Reboots Go X Pants is too small, you will notice that you cannot close the zippers or can only close them with great effort. In this case, you can use our extensions to create further width gradations. Just take a look in our Online Store.
  • Seite 34 Dimensions [in cm] 10 x 7.7 x 7.8 Protection classes IP21; II/ Temperature range [in °C] 10 - 40 (Operation and storage) Pump Unit (16 devices, Go X Pants (S/M or L) pre-installed) Humidity [in %] 30 - 85 (Operation and storage)
  • Seite 35: Safety Instructions

    If you have any problems or questions when using the system, please do the repair is unsatisfactory despite several attempts, or if a replacement not hesitate to contact us on +49 (0) 666 174 891 06 or hallo@reboots.de. device also has a defect for which the manufacturer is responsible, the...
  • Seite 36: Liability Notice

    LIABILITY NOTICE NOTE: Ideally, only use your Reboots product after consulting your doctor. Your Reboots product is not a medical device and is not intended for self-treatment. If you are unsure, please ask your Possible contraindications may include Decompensated doctor.
  • Seite 37 MODE D'EMPLOI...
  • Seite 38: Avant De Commencer

    CHER UTILISATEUR DE REBOOTS Merci d'avoir acheté cet appareil ! Vous aurez beaucoup de plaisir avec votre Reboots ! Si vous êtes satisfait(e) de votre Reboots, nous serions très heureux de recevoir votre recommandation. Ces instructions contiennent des détails importants adressés à l'utilisateur afin de prévenir les risques et d'utiliser l'appareil en toute sécurité.
  • Seite 39 UNITÉ DE COMMANDE - VUE D’ENSEMBLE Voyant d’état de la batterie Indicateur de pression Voyant d’état LED (rouge / bleu / vert) Démarrage (rapide) / Pause Marche / Arrêt Augmenter/diminuer la pression Verrouillage Connecteur femelle Connecteur femelle pompes jambe gauche pompes jambe droite Prise de charge USB-C...
  • Seite 40 Le voyant d’état LED est bleu fixe: Le voyant d’état LED est rouge fixe: Go X est prêt à l’emploi Go X est prêt à l’emploi Go X n’est pas prêt à l’emploi ● ● ● Go X est connecté à votre Le Go X recherche une voir le chapitre «...
  • Seite 41 UNITÉ DE POMPAGE - VUE D’ENSEMBLE Bouton de Verrouillage configuration UNITÉ DE POMPAGE - FACE AVANT UNITÉ DE POMPAGE - FACE ARRIÈRE Sur la face avant, vous verrez un bouton de Sur la face arrière, vous verrez la fermeture rotative ●...
  • Seite 42 VUE D’ENSEMBLE DES PROGRAMMES GO X PROGRAMMES DE MASSAGE A-H: Les chambres à air des pantalons Reboots Go X sont remplies en fonction du programme sélectionné. Il en résulte un massage optimal par ondes de pression glissantes pour une sensation reposante sur les deux jambes.
  • Seite 43 VOTRE PREMIÈRE APPLICATION - COMMENT ENFILER LE PANTALON COMMENCEMENT: Le plus simple est de poser votre pantalon Reboots Go X sur le sol. Pour un accès confortable, ouvrez les fermetures éclair approximativement jusqu’au début de la partie inférieure du pied.
  • Seite 44 REBOOTS PANTS 2.0 TAILLE PANTS L PANTS M...
  • Seite 45 Conseil : pour une protection contre les impuretés, nous vous recommandons de porter Veillez particulièrement à ce que le un pantalon de jogging fin ou un legging. Faites en sorte que les poches soient vides. Fermez également complètement les fermetures à glissière des Reboots Go X Pants branchement soit...
  • Seite 46 Une fois que vous avez redémarré l'unité de contrôle Reboots Go X Reboots Go X, votre programme préféré est sauvegardé et activé dès que vous appuyez sur le bouton...
  • Seite 47: Réglage De La Minuterie

    CE QUE VOUS POUVEZ FAIRE AVEC L’APPLICATION REBOOTS RÉGLAGE DE LA MINUTERIE Choisissez la durée pendant laquelle le programme doit être exécuté (5 à 99 ● min) HOLD - RÉGLER LA MINUTERIE (HOLD) Maintient la pression cible pendant une période de temps définissable dans la ●...
  • Seite 48 CE QUE VOUS POUVEZ FAIRE AVEC L’APPLICATION REBOOTS RÉGLER LA PRESSION CIBLE INDIVIDUELLE POUR CHAQUE CHAMBRE DANS LE MENU MODIFIER EN COURS DE PROGRAMME Dans chaque programme, vous pouvez régler la pression de Si vous avez déjà démarré le programme, vous pouvez facilement chaque chambre à...
  • Seite 49 LE PROGRAMME / LA SÉQUENCE A ÉTÉ TERMINÉ(E) MANUELLEMENT: Si vous avez terminé la session en cours via l’application ou la pause de démarrage ou sur l’unité de commande Reboots Go X en appuyant longuement sur Marche-Arrêt, les pompes s’éteignent et libèrent l’air pour que vous puissiez sortir.
  • Seite 50 #4 LE VOYANT D’ÉTAT LED DU REBOOT GO X EST ROUGE FIXE L’unité de commande Reboots Go X ne reconnaît pas une ou toutes les unités de pompage. Cela peut être dû au fait que tu as malencontreusement branché les câbles des pieds à l’envers dans les prises de raccordement. Cela peut entraîner une grave erreur dans l’unité...
  • Seite 51 EXTENSION DE LA CIRCONFÉRENCE Si la circonférence de votre pantalon Reboots Go X est trop petite, vous le remarquerez car vous ne pouvez pas fermer les fermetures éclair ou ne pouvez le faire qu’avec beaucoup d’effort. Dans ce cas, vous pouvez créer utiliser nos extensions pour réaliser d’autres gradations de tailles.
  • Seite 52 10 x 7.7 x 7.8 Classes de protection IP21; II/ Plage de température [en °C] 10 - 40 (Fonctionnement et stockage) Unité de pompage (16 unités, Pantalon Go X (S/M ou L) préinstallée) Humidité relative (%) 30 - 85 (Fonctionnement et stockage)
  • Seite 53: Consignes De Sécurité

    CONSIGNES DE SÉCURITÉ Lorsque vous n'utilisez pas l'appareil, débranchez-le également du réseau Conservez ce mode d'emploi dans un endroit sûr ! Ne pas démonter ou brûler l'appareil. Les réparations de l'unité de commande ne doivent être électrique. Débranchez toujours l'appareil du réseau avant de le nettoyer. effectuées que par des spécialistes autorisés par Wellcosan GmbH, Conservez l'appareil hors de portée des enfants ou des personnes qui n'ont pas été...
  • Seite 54: Exclusion De Responsabilité

    Le produit ne doit idéalement être utilisé qu'après Remarque : consultation de votre médecin. Reboots n'est pas un appareil médical et n'est pas destiné à l'auto-traitement. En cas de doute, veuillez consulter votre Les contre-indications possibles sont les suivantes : médecin.
  • Seite 55: Instructions Pour L'élimination

    INSTRUCTIONS POUR L'ÉLIMINATION Les produits électroniques ne doivent pas être jetés avec les déchets municipaux non triés. Utilisez plutôt les systèmes de retour et de collecte disponibles. Nous contribuons ainsi tous à la réutilisation, au recyclage et à la valorisation des produits électroniques. Une mauvaise élimination des produits électroniques conduit non seulement à...
  • Seite 56 MANUAL DE INSTRUCCIONES...
  • Seite 57: Observaciones Preliminares

    OBSERVACIONES PRELIMINARES ¡Felicidades por la compra de este dispositivo! ¡Disfruta mucho de tus Reboots! Si estás satisfecho con tu equipo de recuperación, esperamos tu recomendación Estas instrucciones contienen detalles que el usuario debe tener en cuenta para evitar peligros y utilizar el dispositivo de forma segura.
  • Seite 58 DESCRIPCIÓN GENERAL DE LA UNIDAD DE CONTROL Indicador de estado de la batería Indicador de presión Indicador LED de estado (rojo / azul / verde) Inicio (rápido) / Pausa Encender / Apagar Reducir / aumentar la presión Bloqueo de los botones Conector para las bombas de Conector para las bombas la pierna izquierda...
  • Seite 59 Go X está listo para funcionar. ● Go X está listo para funcionar. ● Go X no está listo para funcionar. Go X está conectado a tu teléfono Go X está buscando una conexión Consulta el capítulo «Solución de ●...
  • Seite 60 DESCRIPCIÓN GENERAL DE LA UNIDAD DE BOMBEO Botón de configuración Bloqueo giratorio PARTE DELANTERA DE LA UNIDAD DE BOMBEO PARTE TRASERA DE LA UNIDAD DE BOMBEO En la parte delantera se encuentra un botón de En la parte trasera se encuentra el bloqueo giratorio. ●...
  • Seite 61 DESCRIPCIÓN GENERAL DE LOS PROGRAMAS DE GO X PROGRAMAS DE MASAJE A-H: Las cámaras de aire de los Reboots Go X Pants se llenan en función del programa seleccionado. Esto crea un óptimo masaje por presoterapia que proporciona una sensación de relajación en ambas piernas.
  • Seite 62 PRIMER USO: ¿CÓMO ME PONGO LOS PANTALONES? COLOCACIÓN: Lo más fácil es colocar tus Reboots Go X Pants en el suelo. Para ponértelos de forma cómoda, abre las cremalleras aproximadamente hasta la parte donde comienza el pie. A continuación, recuéstate en los Reboots Go X Pants y cierra completamente las cremalleras.
  • Seite 63 REBOOTS PANTS 2.0 TALLA PANTS L PANTS M...
  • Seite 64: Primer Uso

    «R» y el de la pierna izquierda en el conector «L». Consejo: para evitar que tus Go X Pants se ensucien, recomendamos usar mallas o pantalones de chándal finos. Asegúrate de que los bolsillos estén vacíos. Así mismo, Presta especial atención para que estén...
  • Seite 65 Si no quieres utilizar la fase inicial, también puedes desactivarla. ● ASIGNAR PROGRAMA PREDETERMINADO AL BOTÓN DE INICIO RÁPIDO Si necesitas usar tus Reboots Go X rápidamente con tu programa favorito y sin ● tu smartphone, puedes elegir dicho programa en la lista. Después de reiniciar la unidad de control de los Reboots Go X, tu programa favorito quedará...
  • Seite 66: Ajustar El Temporizador

    FUNCIONES DE LA APLICACIÓN REBOOTS AJUSTAR EL TEMPORIZADOR Selecciona la duración del programa (de 5 a 99 minutos). ● AJUSTAR EL TEMPORIZADOR DE ACTUACIÓN (HOLD) Mantiene la presión objetivo en la(s) cámara(s) activa(s) durante un periodo de ● tiempo definido. El temporizador de actuación comienza a contar cuando se alcanza la presión ●...
  • Seite 67 FUNCIONES DE LA APLICACIÓN REBOOTS AJUSTE INDEPENDIENTE DE LA PRESIÓN OBJETIVO EN CADA CÁMARA EN EL MENÚ DE EDICIÓN DURANTE EL FUNCIONAMIENTO DEL PROGRAMA En cada programa, puedes ajustar la presión por cámara Si ya has iniciado el programa, puedes cambiar fácilmente la mediante la barra de ajuste horizontal.
  • Seite 68 Para guardarlos, dobla los Reboots Go X Pants sin comprimirlos ni forzarlos. Ten en cuenta las instrucciones de almacenamiento que puedes encontrar en la página siguiente. LIMPIEZA: Para limpiar los Reboots Go X Pants es suficiente emplear un paño húmedo con un producto de limpieza suave. Deja que los Reboots Go X Pants se sequen bien. DESINFECCIÓN: Para desinfectar los Reboots Go X Pants puedes utilizar desinfectantes como, por ejemplo, Descosept puro o productos parecidos con una composición similar.
  • Seite 69: Resolución De Problemas

    4. EL INDICADOR LED DE ESTADO DE LOS REBOOTS GO X ESTÁ ILUMINADO EN ROJO La unidad de control de los Reboots Go X no reconoce una o más unidades de bombeo. Una posible causa es que hayas insertado sin querer las conexiones de los cables de las piernas al revés en los conectores. Esto puede provocar un error grave en la unidad de control de los Reboots Go X.
  • Seite 70 AMPLIACIÓN DE LA CINTURA Si la cintura de tus Reboots Go X Pants es demasiado pequeña, lo notarás porque no podrás cerrar las cremalleras o solamente lo lograrás con mucho esfuerzo. En tal caso, puedes ampliar la cintura gracias a nuestras extensiones. Para ello, solo tienes que...
  • Seite 71 10 x 7,7 x 7,8 Clases de protección IP21; II/ Rango de temperatura [en °C] 10 - 40 Unidad de bombeo (16 unidades, Go X pants (S/M o L) (Operación y almacenamiento) preinstaladas) Humedad del aire [en %] 30-85 (Operación y almacenamiento)
  • Seite 72: Avisos De Seguridad

    +49 (0) 666 174 891 06 está afectada por un defecto del que es responsable el fabricante, el o en hallo@reboots.de. cliente tendrá derecho a la rescisión o reducción.
  • Seite 73 Lo ideal es utilizar el producto sólo después de consultar con ADVENTENCIA: tu médico. Reboots no es un dispositivo médico y no está destinado al autotratamiento. Si no estás seguro, consulta a tu médico. Las posibles contraindicaciones pueden ser: Insuficiencia cardíaca descompensada, trastornos del gasto cardíaco con...
  • Seite 74 ISTRUZIONI PER L’USO...
  • Seite 75: Prima Di Iniziare

    PREFAZIONE Congratulazioni per aver acquistato questo dispositivo! Il tuo Reboots ti renderà assai felice! Se sei soddisfatto di questo dispositivo, saremmo lieti di ricevere un tuo riscontro in merito. Queste istruzioni contengono dettagli di rilievo indirizzati all'utente, al fine di prevenire rischi e utilizzare il dispositivo in modo sicuro.
  • Seite 76 PANORAMICA UNITÀ DI CONTROLLO Indicatore di stato della batteria Indicatore di pressione Indicatore di stato LED (rosso/blu/verde) Avvio/Pausa (veloce) Accensione/Spegnimento Riduzione/Aumento della pressione Blocco pulsanti Presa di collegamento Presa di collegamento pompe su gamba sinistra pompe su gamba destra Presa di ricarica USB-C...
  • Seite 77 L’indicatore di stato LED si illumina in verde fisso: fisso: rosso fisso: Go X è pronto per l’uso Go X è pronto per l’uso Go X non è pronto per l’uso ● ● ● Go X è connesso al tuo Go X sta cercando una Consulta il capitolo ●...
  • Seite 78 PANORAMICA UNITÀ DI POMPAGGIO Pulsante di Chiusura a configurazione rotazione LATO ANTERIORE UNITÀ DI POMPAGGIO LATO POSTERIORE UNITÀ DI POMPAGGIO Sulla parte anteriore è presente il pulsante di Sul lato posteriore è presente la chiusura a rotazione ● ● configurazione In caso di sostituzione di una pompa, ti basta rimuoverla ●...
  • Seite 79 PANORAMICA DEI PRODOTTI GO X PROGRAMMI DI MASSAGGIO A-H: Le camere d’aria dei pantaloni Reboots Go X vengono riempite in base al programma selezionato. In questo modo, è possibile impostare un efficace massaggio a onde scorrevoli per una sensazione rilassante su entrambe le gambe.
  • Seite 80 PRIMO UTILIZZO: COME FACCIO A INDOSSARE I PANTALONI? INIZIO: Il modo più semplice è quello di appoggiare i tuoi pantaloni Reboots Go X sul pavimento. Per facilitare l’inserimento, apri le cerniere fino all’inizio della sezione in corrispondenza dei piedi. Quindi, sdraiati sui pantaloni Reboots Go X e chiudi completamente le cerniere. Per evitare che la cerniera si apra durante l'uso, girare la maniglia di scorrimento verso i piedi dopo aver chiuso i pantaloni.
  • Seite 81 REBOOTS PANTS 2.0 DIMENSIONE PANTS L PANTS M...
  • Seite 82: Primo Utilizzo

    Presta attenzione alle tasche. Assicurati inoltre di Assicurati collegamento chiudere completamente le cerniere dei pantaloni Reboots Go X per evitare aperture avvenga in modo corretto, altrimenti improvvise. l’unità di controllo Go X potrebbe non...
  • Seite 83 ● interesse. ASSEGNA IL PROGRAMMA PREDEFINITO AL PULSANTE QUICKSTART Se vai di fretta e vuoi utilizzare i Reboots Go X con il tuo programma Reboots ● preferito senza usare lo smartphone, puoi sceglierlo da un elenco. Dopo aver riavviato l’unità di controllo Reboots Go X, il tuo programma preferito viene salvato ed eseguito non appena premi il pulsante di avvio, anche senza smartphone.
  • Seite 84 LE OPZIONI OFFERTE DALL’APP REBOOTS IMPOSTA IL TIMER Scegli la durata di esecuzione del programma (5-99 minuti) ● HOLD – IMPOSTA IL TIMER (HOLD) Mantiene la pressione target in una o più camere d’aria attive per un periodo di ●...
  • Seite 85 LE OPZIONI OFFERTE DALL’APP REBOOTS IMPOSTA LA PRESSIONE TARGET DI CIASCUNA CAMERA NEL MENU MODIFICA DURANTE IL FUNZIONAMENTO DEL PROGRAMMA IN CORSO In ogni programma è possibile regolare la pressione per Se hai già avviato il programma, puoi modificare la pressione per ciascuna camera attraverso il cursore orizzontale.
  • Seite 86 CHIUSURA MANUALE DEL PROGRAMMA/DELLA SEQUENZA: Se hai terminato la sessione in corso tramite l’app o il pulsante di avvio/pausa sull’unità di controllo Reboots Go X premendo a lungo il pulsante di accensione, le pompe si spengono e rilasciano l’aria per permetterti di uscire.
  • Seite 87: Risoluzione Dei Problemi

    N. 4 L’INDICATORE DI STATO LED REBOOT GO X È DI COLORE ROSSO FISSO L’unità di controllo Reboots Go X non riconosce le unità di pompaggio, né singolarmente né in gruppo. Ciò potrebbe essere dovuto al fatto che hai invertito accidentalmente i connettori nelle prese di collegamento, causando un errore grave nell’unità di controllo Reboots Go X.
  • Seite 88 ESTENSIONE DEL GIROVITA Se la circonferenza dei tuoi pantaloni Reboots Go X è troppo piccola, te ne accorgerai perché non riuscirai a chiudere le cerniere in modo agevole. In questo caso, potrai avvalerti delle nostre opzioni di estensione del girovita. Dai un’occhiata al nostro negozio.
  • Seite 89: Dotazione E Specifiche Tecniche

    10 x 7,7 x 7,8 Classi di protezione IP21; II/ Intervallo di temperatura [in °C] 10 - 40 (Esercizio e stoccaggio) Unità di pompaggio (16 Pantaloni Go X (S/M o L) elementi, preinstallata) Umidità [in %] 30-85 (Esercizio e stoccaggio)
  • Seite 90: Istruzioni Di Sicurezza

    Se hai problemi o domande durante l'utilizzo del sistema, non esita a esclusione del diritto di rescissione o riduzione. Se l'eliminazione dei contattarci al +49 (0) 666 174 891 06 o hallo@reboots.de. difetti fallisce nonostante diversi tentativi o se anche un'unità sostitutiva è...
  • Seite 91 L'ideale sarebbe utilizzare il prodotto Reboots solo dopo aver NOTA: consultato il proprio medico. Il prodotto Reboots non è un dispositivo medico e non è destinato all'autotrattamento. In caso di dubbi, consultare il Le possibili controindicazioni possono includere: proprio medico.

Inhaltsverzeichnis