MoMi Ross Handbuch Seite 9

1. Front wheel installation
Insert the front fork (B) into the lower hole on the frame of the bicycle with the rear wheel (A) as
shown in the picture below.
Attach the clamp (B1) to the top of the bicycle frame as shown in the drawing below.
2. Handlebar installation
Slide the cap (C1) onto the handlebar fork (C). Then, place the handlebar fork in the upper hole of the
bicycle frame. Use the cross hexagon to tighten the clamp (B1). Lower the cap to covers the clamp as
shown below.
EN 9