Product Maintenance - Momi Ross Handbuch

3. Saddle installation
Loosen the clamp (A1), then insert the saddle (D) into the hole in the frame of the bicycle to a height
suitable for your child, then adjust the clamp (A1). If the clamp is too loose or too tight, the bolt can be
adjusted with an cross hexagon so that the saddle is properly secured.
TAKE CARE OF THE ENVIRONMENT:
When you stop using the Momi ROSS product, please dispose of it to a suitable facility in accordance
with local law.
GUARANTEE EXCLUSIONS AND LIMITATIONS:
We are responsible for the quality of our products. Our guarantee does not cover defects or damage
due to misuse of the product or mechanical damage.

PRODUCT MAINTENANCE

The condition of the balance bike should be checked regularly.
Cleaning and maintenance of the bicycle must be performed only by an adult.
Only lubricate moving parts when necessary with a lubricant on silicone base. Remove excess grease
with a clean cloth.
Periodically check the tightness of screws and other parts. Replace or repair parts only when neces-
sary. Use only certifi ed spare parts. Keep the bike in a dry place. Prolonged exposure to direct sunlight
can bend plastic parts.
Before each use of the bike, you should carefully check that the bike is not damaged and
that all screws securing the individual elements of the bike are properly tightened. Worn
or damaged elements should be replaced with new ones at an authorized service center.
Use only original spare parts available from the manufacturer.
The product should be cleaned with a damp cloth or sponge. Protect against dust, moisture, water,
high and very low temperatures, and dropping etc.
Thank you for reading the instruction manual carefully. Please keep it for future reference.
10 EN