BEABA PIXIE Gebrauchsanweisung Seite 8

Cry detector mode
Activate the crying detector. When baby cries, the red light comes
on and lullaby number 1 is activated. After 15 minutes, the lullaby
goes out, and after 20 minutes, the light goes out. For optimum
results from the cry detector, make sure the microphone is at least
30 cm away from any wall, piece of furniture or object.
Projections & colors
• Once the ON button has been pressed, the pixie projector
automatically lights up red. A long press on the projections &
colors button turns the projections off, a short press on the projections & colors button turns
the projections on.
• There are 3 colors available: red, green, blue. To change the projection color, press the projections
& colors button . The default projection color is red. Press once to project the green color, a
second time to project the blue color, a third time to project the colors one after the other - they
will appear in this order: red, green, blue.
Music & Sounds
• Once the ON button has been activated, press the music button
four nature sounds, and one white noise. To scroll through the lullabies and sounds, please press
the button again.
• A long press on the music and sound button turns off the music and sound, a short press turns
on the music and sound.
Plus & Minus
Brightness
• To increase or decrease the brightness of the projector, simultaneously press the Projections
& Colors button and the plus or minus button
Sound level
• To increase or decrease the sound level, press the plus or minus button
the desired effect.
Moving / fixed projections
• Once the ON button is pressed, the pixie projector lights up red. By default, the projections are
fixed. Press the moving / fixed projections button
the projections to return to fixed, press the button once more.
30cm
. There are four lullabies,
, depending on the desired effect.
to make the projections move. If you wish
30cm
, depending on