Mode Operation - Beaba Pixie Gebrauchsanweisung

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP
EN
THEM IN A SAFE PLACE.
1
Projections and colors
Mobile / fixed projections
2
3
Plus & minus
Music & sound
4
5
Microphone
Charge indicator
6
WARNING
Charging the nightlight uses a USB-C
WARNINGS TO AVOID ANY RISK OF STRANGULATION, IT IS ESSENTIAL TO ENSURE THAT THE BABY
CAN NEVER REACH THE CHARGER CABLE*
CHARGING THE PIXIE PROJECTOR NIGHTLIGHT
Never charge the PIXIE PROJECTOR within reach of a child.
*Do not use a longer cable (danger of strangulation).
11
Connect the USB-C cable to an AC adapter or any USB port suitable for the 5VDC voltage of
the nightlight.
1. Connect the other end of the cable to the USB-C connector
up orange.
2. If the pilot light is not charged, the charging indicator turns red during the charging time
3. When charging is complete, the indicator turns green and you can use the projector. Normal
charging time is between 5 and 6 hours. The projector can be left in its cradle or removed from the
cradle for use. To limit charging time, it is best to switch off the projector while charging.

MODE OPERATION

ON/ OFF mode
• To switch on the projector, press the ON button. Projections automatically turn red. Use the
Projections & colors
• To switch off the projector, press the OFF button: the projector switches off. After 20 minutes, the
projections, music and sounds switch off in ON mode.
7
8
9
10
11
11
cable, it should only be done under adult supervision.
, Music & sounds buttons to set the projector parameters.
Charging port
Cry sensor mode
OFF: Turns projector off
ON: Turns projector on
USB / USB-C cable
7
. Charge indicator
6
lights
6
.