Exsys EX-11017 Anleitung

CONNECTORS & LEDs
USB-C connection:
•
Supports Power Delivery (PD) 2.0 & 3.0 (PPS)
•
Maximum power: 65 W per Port, 1000W in total
•
Output voltages/currents:
•
5 V, 3 A
•
9 V, 3 A
•
12 V 3 A
•
15 V, 3 A
•
20 V, 3.25 A
•
Supports Qualcomm Quick Charge 2.0, 3.0, 4+, 5
•
Supports Samsung Fast Charging Protocol AFC
•
Supports Huawei FCP, TFCP, SCP, SFCP
•
Supports Battery Charging BC1.2, Apple Protocol
•
Supports MTK PE1.1, PE2.0
Notice Power Delivery/Quick Charge
•
Plug&Go: No manual settings necessary: Power Delivery and Quick Charge
automatically adjusts voltage and power.
•
Note that for efficient and optimized charging, PD (Power Delivery) or Quick Charge
function must be supported by your end device.
•
Due to the large number of PD/QC-enabled devices with different firmware versions,
the function may not be fully supported.
LED charging indicators:
Colour
Red Charging
Green Fully charged
5
HARDWARE INSTALLATION
Please read the following installation instructions carefully.
1. If required, mount the charging station in a 19" rack using the supplied mounting brackets
2. Connect the charging station to a power outlet.
3. Switch on the charging station using the switch on the back.
4. Connect your devices using a compatible cable.
5. The LED charging indicator turns to red.
6. After the device is fully chrged, the indicator LED turns to green.
NOTICE & CLEANING
Operate the product only from an approved power outlet. The socket outlet must be located
near the product and must be easily accessible.
When not in use, disconnect the product from the mains using the on/off switch or unplug the
mains cable from the socket.
Temperature controlled fans:
It It is normal for the charging station to heat up during operation. We recommend that you do
not use the EX-11017 in a closed or poorly ventilated environment.
The speed of the built-in fans is determined and regulated by the ambient temperature and
output power. Depending on the intensity, the resulting fan noise may be perceived as
Status
disturbing in quiet environments.
Never cover the ventilation openings of the device.
To clean the device, please use only a dry, non-fibrous cloth and remove the dirt with light
pressure. In the area of the connections, please make sure that no fibers of the cloth are left in
the socket.
Attention! Never use a moist or wet cloth for cleaning!
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
Switzerland: Italy:
EXSYS Vertriebs GmbH EXSYS Italia Srl
Dübendorfstrasse 17 Via Belvedere, 45/B
8602 Wangen I-22100 Como
www.exsys.ch www.exsys.it
6
Anleitung Anleitung
Vers. 1.0, 14.06.25
AUFBAU
USB-C PD 16x 65W LED Ladestatusanzeige
BESCHREIBUNG & TECHNISCHE DATEN
Mit einer gewaltigen Gesamtausgangsleistung von 1008 W eignet sich die 16-Port USB-C
Ladestation EX-11017 ideal als leistungsstarke Ladestation für Schulen/Hochschulen, Hotels,
Restaurants, Vereinslokale uvm. Alle 16 USB-C Ports unterstützen Power Delivery (PD) mit
einer maximalen Ladeleistung von jeweils 65 W. So können 16 Notebooks/MacBooks aber
auch Smartphones, Tablets und andere Geräte simultan geladen werden. Das Rundum-
Lüftungskonzept mit temperaturgeregelten Lüftern verhindert übermäßige Wärmeentwicklung
und damit die Überhitzung im Innern der Ladestation. Mit den mitgelieferten Montagebügeln
lässt sich die EX-11017 in Ladeschränke oder 19"-Racks einbauen und verwandelt diese so in
hocheffiziente Ladestationen, die über Nacht z.B. die Tablets eines ganzen Klassenzimmers
aufladen können.
Kompatibilität: USB-C PD 2.0/3.0, Qualcomm Quick Charge 2.0/3.0/4+/5 uvm.
Stromversorgung: 110-240 VAC, Ein/Aus Schalter auf der Rückseite
Anschlüsse: 16x USB-C
Lieferumfang: EX-11017, Netzkabel, 19"-Rack Kit, Anleitung
1
EX-11017