Connecting A Usb; Software Update - Samsung HW-M450 Benutzerhandbuch

06 connectInG a uSb

You can play music files located on USB storage devices through the Soundbar.
uSb port
DIGITAL AUDIO IN HDMI IN
(OPTICAL)
USB (5V 0.5A)
HDMI OUT
AUX IN (TV-ARC)
Micro uSb to
uSb adapter cable
(not supplied)
1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one
end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your
Soundbar.
• Micro USB to USB adapter Cable is sold separately. To purchase, contact a Samsung Service
Centre or Samsung Customer Care.
2. Connect your USB device to the female end of the adapter cable.
3. Press the (Source) button on the right side panel or on the remote control, and then select "uSb".
4. "uSb" appears in the display screen.
5. Play music files from the USB storage device through the Soundbar.
• The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for
more than 5 minutes.

Software update

Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware
update stored on it to the USB port on your Soundbar.
For more information about how to download update files, go to the Samsung Electronics website at
(www.samsung.com  Support).
Then, enter or select the model of your Soundbar, select Software & Apps, and then Downloads.
The option name can vary.
DC 24V DC 24V
USB (5V 0.5A)
ENG - 13
Display
uSb