Brainz 38647 Bedienungsanleitung

BRAINZ RETRO CLOCK SPEAKER BLACK
PLEASE READ THE INSTRUCTIONS CAREFULLY
What you need
• USB-C cable (included)
• USB adapter or USB power supply (not included)
• Mobile phone, tablet, or laptop with Bluetooth (not included)
• TF/SD card, AUX, DC (optional, not included)
How to charge the speaker
Connect the included cable to the speaker and connect the USB side to a power source. The speaker is charging
when you see a red light next to the rotary knob. When the speaker is fully charged, this red light will turn off.
How to set up the device
Make sure the speaker is fully charged before using it. Turn on the speaker by pressing and holding the power
button for 3 seconds. The speaker will appear under the new Bluetooth connections on your device as 'BRAINZ
S185'. Clicking on this will connect your device and the speaker will be ready for use. The speaker will let you know
if your device is connected by means of a sound.
Switching modes
Briefly click the on/off button to switch between clock and music mode. When music mode is on, a blue light will be
lit. Within this mode, you can choose between Bluetooth, radio, or AUX. To switch between these, click the mode
button several times until you reach your desired mode.
Radio
For the best results when searching for and listening to radio stations, use the extendable antenna on the back of
the speaker.
Setting the clock
Click the 'time' button to set the time. After the first click, the hour can be set. Click the same button again to set the
minutes. Then click the button once more to confirm the time.
Setting the alarm clock
Click on the button with the clock symbol to set the alarm clock. After the first click, you can set the hour. Click the
same button again to set the minutes. Click the button once more to set the desired alarm (5 options). Click the
button again to adjust the volume of the alarm. Click one last time to confirm the alarm.
To turn off the alarm, press and hold the 'time' button. The clock symbol will no longer be illuminated on the display.
Snooze
When the alarm goes off, you can snooze by clicking the rotary knob.
Brightness
Adjust the brightness of the display by clicking the rotary knob (only in clock mode). Click the
brightness around the rotary knob.
Volume
Turn the rotary knob to decrease or increase the volume.
Pause music
Click the rotary knob to pause the music. Repeat this to resume the music.
Next/previous track
To go to the previous track, click the left arrow. To go to the next track, click the right arrow.
Adjust music settings
Click on the EQ button to switch between 6 different music settings based on different music genres.
INSTRUCTION MANUAL
AND KEEP THEM FOR FUTURE REFERENCE
EN
symbol to adjust the