Herunterladen Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

BRAINZ SPEAKER SPIKE ORANGE
PLEASE READ THE INSTRUCTIONS CAREFULLY
What you need
USB-C cable (included)
USB adapter or USB power supply (not included)
Mobile phone, tablet, or laptop with Bluetooth (not included)
TF/SD card (optional, not included)
How to charge the speaker
Connect the included cable to the speaker and connect the USB side to a power source. The speaker is charging
when you see a red light. When the speaker is fully charged, this red light will turn off.
How to set up the device
Make sure the speaker is fully charged before using it. Turn on the speaker by pressing and holding the power
button for 3 seconds. The speaker will appear under the new Bluetooth connections on your device as "BRAINZ
S205." Clicking on this will connect your device and the speaker will be ready for use. The speaker will let you know
when your device is connected by means of a sound.
Volume
Press and hold the + button to increase the volume. To decrease the volume, press and hold the – button. Is the
music a little quiet at the highest volume? Check that the volume on your device is also set to maximum.
Pausing music
Briefly press the on/off button to pause the music. Repeat this to resume the music.
Next/previous track
To go to the previous track, briefly press the – button. To go to the next track, briefly press the + button.
LED
Briefly press the M button to switch between the 4 different LED patterns. To turn off the LED lighting, press this
button repeatedly until the lighting is off. Hold down the button to switch between different colors. Release the button
when you reach the desired color.
Turning off
To turn off the speaker, press and hold the on/off button for 3 seconds.
Caution:
Do not use a charger with a higher voltage than suitable for this product.
For more information about this product, please visit
INSTRUCTION MANUAL
AND KEEP THEM FOR FUTURE REFERENCE
This manual is valid for article number 38665.
EN
www.brainz-electronics.nl
loading

Inhaltszusammenfassung für Brainz SPIKE

  • Seite 1 Make sure the speaker is fully charged before using it. Turn on the speaker by pressing and holding the power button for 3 seconds. The speaker will appear under the new Bluetooth connections on your device as “BRAINZ S205.” Clicking on this will connect your device and the speaker will be ready for use. The speaker will let you know when your device is connected by means of a sound.
  • Seite 2 3 seconden ingedrukt te houden. De luidspreker verschijnt onder de nieuwe Bluetooth-verbindingen op uw apparaat als “BRAINZ S205”. Als u hierop klikt, wordt uw apparaat verbonden en is de luidspreker klaar voor gebruik. De luidspreker laat u door middel van een geluid weten wanneer uw apparaat is verbonden.
  • Seite 3 Lautsprecher ein, indem Sie die Ein-/Aus-Taste 3 Sekunden lang gedrückt halten. Der Lautsprecher wird unter den neuen Bluetooth-Verbindungen auf Ihrem Gerät als „BRAINZ S205” angezeigt. Wenn Sie darauf klicken, stellt Ihr Gerät eine Verbindung her und der Lautsprecher ist betriebsbereit. Der Lautsprecher signalisiert durch einen Ton, dass Ihr Gerät verbunden ist.

Diese Anleitung auch für:

38665