Technical Data; Proper Use; Before Starting The Equipment - EINHELL TC-AC 190/8 Kit Originalbetriebsanleitung

2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Compressor
•
Tire inflation meter
•
Adapter set (a,b,c)
•
Blow-out pistol
•
Original operating instructions

3. Proper use

The compressor is designed to generate com-
pressed air for compressed air driven tools.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_TC_AC_190_8_Kit_SPK1.indb 17 Anl_TC_AC_190_8_Kit_SPK1.indb 17
GB

4. Technical data

Mains connection: ................... 220-240 V ~ 50 Hz
Motor rating: ................................1.1 kW S3 15%
Idle speed n (pump): ..........................3450 min
0
Idle speed n (motor): .........................15000 min
0
Operating pressure bar: ............................. max. 8
Theoretical suction rate l/min.: ...................... 190
Output (compressed air)
at 7 bar: . ........................................... 55 liters/min
Output (compressed air)
at 4 bar: ............................................. 83 liters/min
Sound power level L
WA
K uncertainty .......................................... 1.5 dB
WA
Sound pressure level L
K uncertainty .......................................... 1.5 dB
pA
Protection type: ............................................. IP20
Weight of the unit in kg: ................. approx. 6.5 kg
Protection class:............................................. II/
Danger!
Noise
The noise emission values were measured in ac-
cordance with EN ISO 3744.
Operating mode S3 - 15% - 10min: S3 = Inter-
mittent mode without infl uencing the starting pro-
cess. This means that during a period of 10 min
the max. operating time is 15% (1.5 min).

5. Before starting the equipment

Before you connect the equipment to the power
supply make sure that the data on the rating plate
are identical to the supply voltage.
•
Check the equipment for damage which may
have occurred in transit. Report any damage
immediately to the transport company which
was used to deliver the compressor.
•
Install the compressor in the vicinity of the
point of consumption.
•
Avoid long air lines and supply lines (extensi-
on cables).
•
Make sure that the intake air is dry and dust-
free.
•
Do not install the compressor in a damp or
wet room.
•
The compressor may only be used in suitable
rooms (with good ventilation and an ambient
temperature from +5 °C to 40 °C). There must
- 17 -
-1
-1
in dB: ............................ 97
in dB: ........................ 75
pA
17.10.2016 14:26:10 17.10.2016 14:26:10