FeelNeedy RC-547 Gebrauchsanweisung Seite 2

TO ASSEMBLE
Solar panel
PlR sensor
Adjusting sensitivity
and distance
LED flash light
Ultrasonic speaker
INTALL
1. Place the unit pointed towards the area that you want to protect (for
example, in the flowerbed or against the wall, etc.)
2. Remember to choose a place where the solar panel at the top can get as
much sunshine as possible. And avoid covering the solar panel.
3. If you mount the unit in the ground, insert the spike into the ground
carefully. Please leave the spike 12cm or more above the ground. It is
suggested that you dig a hole and then insert the unit to ensure no damage
occurs.
4. The item can be inserted in the ground, mounted against the wall, or put
the top part directly on the flat surface.
Frequency control button
Adaptor port
Insert the ground
- 2 -
EN