Emergency Procedure; Work Instructions - Gude Rw 18-0 Originalbetriebsanleitung

Despite the observance of the operating instructions
there still may be some hidden residual risks.

Emergency procedure

Conduct a fi rst-aid procedure adequate to the injury
and summon qualifi ed medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fi tted with a fi rst-aid kit. It is essential to
replace any used material in the fi rst-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation::
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
WARNING/CAUTION!
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear a respirator!
Unplug the machine before any work
on it.
For a mixture of e.g. mortar, grouts, ce-
ment, whitewash, concrete, screed, etc.
For a mixture of e.g. glues, varnishes,
paints, etc.
CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference.
Safety information for agitators
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Keep children and other persons including animals in
a safe distance when using the appliance.
Wear suitable work clothing such as sturdy shoes with
non-slip sole, safety glasses and hearing protection!
The dust produced when using this tool may be
harmful to health. Do not inhale the dust. Use a dust
absorption system and wear a suitable dust protec-
tion mask. Remove deposited dust thoroughly, e.g.
with a vacuum cleaner.
Do not wear loose clothing or jewels as they could get
caught by the rotating parts. Do not use the device
when you go barefoot or wear open sandals.
Please turn the device immediately off when the
tool used gets blocked! Do not turn the device on
again when the tool is still blocked. This could cause
bounce back with a high reaction moment. Deter-
mine and remove the cause of the blocking of the
tool used while respecting the safety instructions.
Possible causes include::
• Jamming
• Overload of power tools
Do not reach into the running device.
Always keep the connection cable from the working
area of the device. Always guide the cable back-
wards, away from the device!
Check all screw and plug-in connections and
protective equipment if fi rm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not use the device near fl ammable liquids or
gases. Risk of fi re and explosion in case of short
circuit.

Work instructions

Do not reach into the rotating mixer (rotating
stirrer).
Hold the device fi rmly with two hands and away from
your body.
Avoid splashing! Work with low revolutions when im-
mersing or removing the mixed to / from the mixture
being stirred.
The stirring extensions included in the supply are
suitable for stirred materials with heavier and tougher
consistency: e.g. mortar, grouts, cement, plaster,
whitewash, concrete, screed, etc.
ENGLISH
11