Herunterladen Inhalt Inhalt Diese Seite drucken

T&S B-0963 Installations- Und Wartungsanleitungen

Rückschlagventil
Vorschau ausblenden Andere Handbücher für B-0963:
Limited One Year Warranty
T&S warrants to the original purchaser (other than
for purposes of resale) that such product is free from
defects in material and workmanship for a period of
one (1) year from the date of purchase. During this
one-year warranty period, if the product is found to
be defective, T&S shall, at its options, repair and/
or replace it. To obtain warranty service, products
must be returned to...
T&S Brass and Bronze Works, Inc.
Attn: Warranty Repair Department
2 Saddleback Cove
Travelers Rest, SC 29690
Shipping, freight, insurance, and other transpor-
tation charges of the product to T&S and the return
of repaired or replaced product to the purchaser are
the responsibility of the purchaser. Repair and/or
replacement shall be made within a reasonable time
after receipt by T&S of the returned product. This
warranty does not cover Items which have received
secondary finishing or have been altered or modi-
fied after purchase, or for defects caused by physi-
cal abuse to or misuse of the product, or shipment
of the products.
Any express warranty not provided herein, and
any remedy for Breach of Contract which might arise,
is hereby excluded and disclaimed. Any implied
warranties of merchantability or fitness for a particu-
lar purpose are limited to one year in duration. Under
no circumstances shall T&S be liable for loss of
use or any special consequential costs, expenses
or damages.
Some states do not allow limitations on how long
and implied warranty lasts or the exclusion or limi-
tation of incidental or consequential damages, so
the above limitations or exclusions may not apply
to you. Specific rights under this warranty and other
rights vary from state to state.
P/N: 098-009579-45 Rev.1
Date: 980521
Drawn: CW
Checked: MAB
7-23-98
Approved: MVW
7-23-98
Installation and
Maintenance
Instructions
B-0963 (1/2")
CONTINUOUS PRESSURE
VACUUM BREAKERS
Deutsch:
Installations- und
Wartungsanleitungen
Español:
la Instalación y las
Instrucciones de
Mantenimiento
Français:
les Instructions
d'Installation et
d'Entretien
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für T&S B-0963

  • Seite 1 T&S of the returned product. This warranty does not cover Items which have received secondary finishing or have been altered or modi- B-0963 (1/2”) fied after purchase, or for defects caused by physi- cal abuse to or misuse of the product, or shipment of the products.
  • Seite 2 Sectional View...
  • Seite 3 Part Number Guide Vacuum Breaker Assembly Body Shut-off Valve Test Cock Bleed Screw Hood Screw Hood Vent Springs Bonnet O'-Ring Vent 'O'-Ring Retainer Welded Check Assembly Parts for this assembly are not available for replacement.
  • Seite 4: Typical Installation

    A typical installation is spillage may occur when water shown below: outlet is above vacuum breaker or when water is shut off abruptly. backplate B-0963 vacuum Features: breaker Designed for indoor point of use applications to prevent back-...
  • Seite 5: Instalación Típica

    Algunos leves derrames pueden ocurrir cuando la instalación típica esta ilustrada abajo. boquilla este sobre el Anti- Sifón o Espaldor cuando el agua se cierre B-0963 bruscamente. Anti- Facciones: S i f ó n Es diseñado para ser usado en el...
  • Seite 6 L’installation quand l’eau est coupée brusquement. typique est montrée ci-dessous: Les Caractéristiques: la tôle en arrière B-0963 la vanne- Conçu pour le point d’intérieur caisse-vide d’applications d’utilisation pour empêcher en arrière le siphonage de l’eau souillée dans l’approvisionnement en eau potable.
  • Seite 7: Typische Installation

    Vakuumunterbrecher liegt oder das Unten wird eine typische Installation Wasser plötzlich abgesperrt wird. gezeigt: Abschlußplatte Merkmale B-0963 Es ist für die Innenbenutzung konstruiert, Rückschlagventil um den Rücklauf von Schmutzwasser in die Trinkwasser-versorgung zu verhindern. Die Trennung des Wasserzuflusses von dem Luftzufluß...
  • Seite 8 RELATED T&S BRASS PRODUCT LINE B-0965 Atmospheric Vacuum Breaker Assembly with Exposed Outlet B-0929 Atmospheric Back Flow Preventer B-0456 Atmospheric Vacuum Breaker Assembly T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088, T &...
  • Seite 9: Maintenance Instructions

    Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from the date of purchase.
  • Seite 10: Exploded View

    Exploded View * Some items are listed for instructional purposes and may not be sold as separate parts.
  • Seite 11 Part Number Guide Service Sink Faucet Assemblies Asm, Base Faucet B-0665-BSTP Body, Faucet Asm, Flange Coupling 002893-40 Washer, Coupling Flange 001019-45 Asm, BST Spindle & Insert 163A Nipple, Close 1/2 HWL 002534-25 Asm, Eterna w/ Spring Checks & Handle (Cold) 002711-40 Asm, Eterna w/ Spring Checks &...
  • Seite 12: Models With Built-In Stops (-Bst)

    Models with Built-In Stops (-BST) B-0230-BST Sink mixing faucet with 18” swing nozzle; lever handles B-0231-BST Sink mixing faucet with 12” swing nozzle; lever handles B-0232-BST Sink mixing faucet with 16” swing nozzle; lever handles B-0234-BST Sink mixing faucet with 6” cast spout; lever handles B-0265-BST Combo sink faucet w/ 18”...
  • Seite 13: General Instructions

    General Instructions Note: This is a general instructional example of units using -BST. Nozzles should be installed on unit fi rst. Nozzle Installation ex. model B-0665-BST 1. Remove no.6 from both sides of no.1. 2. Apply Loctite #680 to threads of no.5 and no.12. 3.
  • Seite 14: Instrucciones Generales

    Instrucciones Generales Nota: Esto es un ejemplo general instruccional de unidades que utilizan - BST. (Inter- ceptor Incorporado.) Primero se debe de instalar las boquillas. Instalación De Boquilla: Ejem. Modelo B-0665-BST 1. Remuéva la parte No.6 de ambos lados de la parte No.1. 2.
  • Seite 15: Instructions Générales

    Instructions Générales Celui-ci être un exemple générale et instructif des élément s qui utiliser Les ajutages devoir être installer au début. L’Installation De L’Ajutage: ex. modèle B-0665 -BST 1. Enlever Nº.6 de chaque côté de Nº.1. 2. Appliquer “loctite #680” aux fi lets de Nº.5 et Nº.12. 3.
  • Seite 16: Allgemeine Anleitungen

    Allgemeine Anleitungen Anmerkung: Die ist ein allgemeines Installationsbeispiel für Armaturen, die BST verwenden. Düsen sollten zuerst auf die Einheit installiert werden. Einbau des Schwenkarms - Modell B-0665-BST 1. Nr. 6 beidseitig von Nr. 1 entfernen. 2. Für die Gewinde von Nr. 5 und Nr. 12 Loctite 680 verwenden. 3.
  • Seite 17 RELATED T&S BRASS PRODUCT LINE B-0657 Service Sink Faucet B-0669 Service Sink Faucet T&S BRASS AND BRONZE WORKS, INC. A fi rm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088, T & S Brass-Europe Travelers Rest, SC 29690 ‘De Veenhoeve’...

Inhaltsverzeichnis