Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before cleaning, pull out the mains plug or switch off the fuse in
the fuse box.
Do not use steam- or high-pressure cleaners, hoses or sprays to
clean the appliance.
Preventing material damage
damage
material
Preventing
Never kink, crush, modify or cut through
water hoses.
Only use the water hoses supplied with
the appliance or genuine spare hoses.
Never re-use water hoses that have been
used before.
Secure the connection points correctly
using hose clamps.
Only remove the filter container for main-
tenance work and then reinsert it cor-
rectly.
Never remove the filter container during
operation.
Only use the scraper provided to remove
microplastics from the filter container.
Never knock the filter container against
other objects to loosen microplastic
residues.
Do not use harsh or abrasive detergents.
Do not use cleaning products with a high
alcohol content.
Do not use hard scouring pads or clean-
ing sponges.
Clean the appliance using only water
and a soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately if
they come into contact with the appli-
ance.
Installation and connection
connection
and
Installation
Unpacking the appliance
1. Remove any packaging and protective
covers completely from the appliance.
2. Check the appliance for visible damage.
Included with the appliance
After unpacking all parts, check for any
damage in transit and completeness of the
delivery.
Appliance
Accompanying documents
Power supply (model:
YL361-2401500V)
Water outlet hose
Preventing material damage en
Hose clamps and cable ties
Appliance
You can find an overview of the parts of
your appliance here.
Fig.
1
Filter housing
Status light
Filter container
Filter cover
Scraper
Filter net
Rotary head
Mains connection
Water inflow
Water outlet
Disposing of packaging
The packaging materials are environment-
ally compatible and can be recycled.
Sort the individual components by type
and dispose of them separately.
Connecting the appliance
Tip: Scan the QR code to see an animation
of the process.
Setting up the appliance
You can set up the appliance on the wash-
ing machine or on the worktop, within a
cupboard or beside the washing machine.
Fig.
2
Note: Follow these instructions when in-
stalling your appliance:
The ground must be level and stable.
The appliance feet must adhere to the
surface.
7
Werbung
