Werbung
Cleaning
1. Before cleaning, always unplug the
GB
appliance. Wipe the outside of the
kettle with a damp cloth. Occasionally
rinse out the kettle with clean water.
Warning! Never immerse the
housing, plug, and cord in water or
any other fluid.
Troubleshooting
Problem
GB
The appliance switches off before boiling.
The appliance does not switch off.
The appliance cannot be switched on.
16
2. To clean the mesh filter, grab the
mesh filter and lift it out. Rinse
under clean, running water, and insert
it back into the kettle in the correct
orientation.
Cleaning the base plate – a stainless
steel cleaning product may be used to
clean the metal of the base plate.
Possible cause
Too much lime scale at the base of the kettle.
After operating with little or no water, the
appliance has not cooled down suffiently.
3. Decalcifying is recommended every
three months for best performance.
Fill the kettle with water and
decalcifyer according to decalcifyer
product instructions. Do not boil
the solution as it could foam over.
Afterwards, rinse kettle thorougly
with fresh water.
Solution
Run the decalcifying procedure.
Close lid until it locks.
Instert the strainer correcttly.
Allow to cool a short time and try again.
Werbung
Fehlerbehebung
