a phone number from the list. Be aware that you cannot
read out the clip list (getting SMS messages) because it
could by far exceed the size limitation of SMS texts.
Please note that all commands listed in the section
"Configuration SMS" require the 4-digit keyword at the
beginning.
7.3 Examples for SMS commands
Please note that for these examples the 4-digit keyword
4244 has been chosen. Instead of this keyword you have to
use the 4-digit keyword of your STD32!
Start-up alarm off, relay 1 on, relay 2 off, time of activation of
input 1: 5 sec.:
Switching time of relay 1 = 90 seconds:
Reset settings to factory settings:
Configuration of the second alarm number:
Deleting a alarm number:
68
SMS: 4244 S:0.O1ON.O2OFF.I1:5.
SMS: 4244 C2:+491721234567.
SMS: 4244 O1:90.
SMS: 4244 R:
SMS: 4244 C2:.