Gainsborough Rattan Bedienungsanleitung

10pcs Solar Plastic Rattan String Lights
Item No:
68598
Instructions for Use
Please read and retain these instructions for future reference
Power Details:
Battery Type & details:
CHARGING AND OPERATION:
1. Set switch (located on the back of solar case) to "ON (steady on)" OR "FLASH" position. Charge the solar
product
by placing it under direct sunlight for at least 8 hours.
2. The light will work automatically. It will automatically charge under direct sunlight during the daytime and illuminate
at night.
NOTE: To verify that the switch is correctly in the "ON" OR "FLASH" position, cover the solar panel with your hand
and the light should turn on automatically.
ALWAYS POSITION THE SOLAR PANEL IN DIRECT SUNLIGHT
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ANY APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
• READ ALL INSTRUCTIONS BEFORE USE.
• FOR DOMESTIC OUTDOOR USE ONLY.
• BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE
NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
• THE USE OF ANY ACCESSORY OR ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE
INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
• REPLACE THE BATTERIES IF LEFT FOR LONG PERIODS OR NO LONGER CHARGING.
v001: 13/02/25
ENGLISH INSTRUCTION
1 pc "AA" 1.2v 300Mah, Ni-MH, (Rechargeable)