ECOVACS DEEBOT OZMOT8 Bedienungsanleitung Seite 7

To disable Wi-Fi module on DEEBOT, power the
robot ON.
Place the robot on the Docking Station making
sure the Charging Contacts on DEEBOT and the
Docking Station Pins make a connection.
Press and hold the AUTO
robot for 20 seconds
beeps.
To enable Wi-Fi module on DEEBOT, power the
robot OFF and then power ON. The Wi- Fi module
is turned on when DEEBOT
Class
Short-circuit-proof
transformer
Switch mode power supply
For indoor use only
Direct
Alternating
Mode Button on
until DEEBOT emits
is restarted.
II
safety isolating
current
current
For EU Countries
For EU Declaration of Conformity information, visit
https://www.ecovacs.com/global/compliance
the
3
Correct Disposal
This marking indicates that this product should
not be disposed
throughout the EU. To prevent possible harm to the
environment or human
waste disposal, recycle it responsibly to promote
the sustainable
recycle your used device, please use the return
and collection
where the product was purchased. They can safely
recycle this product.
of this Product
of with other household
health from uncontrolled
reuse of material resources.
systems or contact the retailer
waste
To
EN