Viltrox DC-A1 Produktanleitung

7-inch Professional Photographic Monitor
Please read the User Manual carefully before using this product.
Please keep this Manual properly for future reference.
Please use it correctly after fully understanding the contents herein.
Shenzhen Jueying Technology Co., Ltd. Executive standard: Q/JYKJ001-2019
Tel: +86-755-2877 9024 Fax: 0755-2877 4730
Email: info@viltrox.com Website: www.viltrox.com
Address: 1207, Floor 12, Block B, Chinto Science&Technology Building, Minzhi Street ,
Longhua, Shenzhen,Guangdong,China
Production Address: Floor 3, Building 1, Simaiou Science Park, No. 52-1, Juyuan Road,
Qiuchang Town, Huiyang District, Huizhou, Guangdong ,China
Cleaning
1. Please remove the battery before cleaning.
2. The surface of the LCD screen has been specially treated to reduce
reflected light, so its performance may be reduced in case of improper
maintenance.
3. Gently wipe the screen or chassis with a soft and dry cloth (such as a
cleaning cloth or glass cleaning cloth).
4. Remove stubborn stains using neutral detergent.
5. Do not clean this device using thinner, alcohol and other organic solvents
to avoid damage to the chassis and screen.
6. Do not wipe the chassis with a rough cloth to avoid scratching the surface
of the chassis.
7. The surface coating of the chassis may be damaged or peeled off after it
has been in contact with rubber or vinyl products for a long time.
Introduction to functions
The DC-A1 is a 7-inch professional photographic monitor with a
resolution of 1920×1080 pixels. It's suitable for digital cameras with
interchangeable lenses or digital HD camcorders, providing real-time
display of high-definition signals from HDMI sources. This powerful
monitor offers a monitoring assistance system for photographers and
meets their high-definition image quality needs in photography.
Product features:
◎ 3D LUT function: With the 3D LUT, it's possible to control the full
three-dimensional color space, significantly expanding the monitor's color
display potential. This feature also serves as a solid backbone for achieving
hardware calibration's 'what you see is what you get' capability. The device
can load up to 20 3D LUT files via a USB interface.
◎ Audio column: Monitors the audio signals within the HDMI high-definition
signals, performing real-time waveform switching to reflect different highs and
lows.
◎ Gyroscope functions: This device has gyroscope detection function to
adjust the screen up and down and automatically flip the image without
manual adjustment, optimize and improve the user experience, and thus
better meet the needs of photographers.
◎ Brightness histogram: Monitors the brightness of images transmitted by
HDMI high-definition signals, capturing and displaying real-time changes in
brightness values according to image variations.
◎ False color function: It can achieve more precise exposure and lighting
control through image conversion, with red for excessive lighting, blue for
insufficient lighting and green for appropriate lighting conditions.
◎ Focusing function: Set the focus on the screen area.
◎ De-squeeze function: Restores the compressed and deformed image of the
camera, displaying the original proportion of the physical object.
◎ Power supply: It can switch among the three power supply modes of DC
adapter, lithium battery and Type-C at any time to fully meet the power supply
needs of customers in different scenarios without waiting for a single power
supply.
◎ Shortcut keys: Allows setting different shortcut keys according to customer
preferences for one-touch settings without the need to enter menu
configurations.
◎ Signal: This device has HDMI IN function; in addition, it comes with HDMI
OUT output function, which is convenient to connect other monitors or
devices on site and thus meet the external expansion display functions of
different photographers.
◎ USB interface: Supports USB interface for upgrades and loading 3D LUT
function files.
◎ Touch screen: 7-inch sensitive touch screen is provided to facilitate
different photographers to operate the device.
3
Installation of battery and adapter
Installation of battery
This product can be equipped with rechargeable lithium batteries.
The battery models include NP-F550/F750/F970 and other specifications.
1. Gently press the battery inwards in 2. Remove the battery. Slide
the direction shown, and then the battery to the right while
slide it to the left (do not release). holding down the battery
There is a clicking sound when the release key, and then take
battery is fixed properly. out the battery.
Note:Be careful to prevent the battery
from falling on the ground when
taking it out.
Installation of adapter
①
1. Select the direction in which the
adapter is mounted according to the
shape of hot shoe on the camera. (①)
2. Align the 1/4 screw of the adapter with
the 1/4 screw hole on the device. (②)
②
3. Tighten the adjustment knob of the
③
adapter. (③)
4. Use the adapter
① Fully insert the base of the adapter into the universal hot shoe base in
the direction shown in the figure.
②
Tighten the rotary table of the adapter to fix it on the camera.
②
①
Note: If you use a camera with a pop-up built-in flash, you should pay attention to the
following points:
1. Be sure to turn off the camera's built-in flash. If the camera has a built-in automatic
flash function, please turn it off.
2. Please remove this device from the camera before using the flash.
5
Touch screen operation
Menu: Double-tap the screen start the menu options; tap the blank space to exit
the menu mode.
VolumeBar Histogram Vectorscope RGB Parade FullWaveform 3D LUT
Volume adjustment: Backlight adjustment:
Scroll up and down on the left side Scroll up and down on the right
of the screen for adjustment. side of the screen for adjustment.
Zoom in and out: Zoom in and out with your finger (as shown in the figure) to
see details.
VolumeBar Histogram Vectorscope
(Zoom in) (Frame disappears) (Double-tap again)
Note: Do not double-tap to display the menu in the process of zooming in and out, but
double-tap to display the menu after the "box for zooming in and out" disappears.
Menu function
Power On/Off
[ Power On ]
Turn on the <⑥Power Button> and the signal indicator will light green after 3 seconds and
the screen will light up.
(* When there is a signal, the signal indicator always turns green; When there is no signal,
the signal indicator always turns red.)
[ Power Off ]
Turn off the <⑥Power Button> and the signal indicator and the screen go out.
Introduction to menu
USB
Input Source
【Wave form】
【Monitoring tool】
【Mark and composition】
【Image】
【System settings】
VolumeBar Histogram Vectorscope RGB Parade FullWaveform
7
Troubleshooting
Necessary inspections should be carried out before sending the device for
repair. Please contact your dealer if the device is still unable to work properly.
Fault Causes and troubleshooting measures
The battery is not unlocked → press the battery release button, and then
Battery cannot be taken out
take out the battery.
The battery has run down → replace the battery.
This device has no power The power adapter (not accompanied) is disconnected. Please reconnect it
properly.
This device cannot be
Incorrect type of adapter used, please select the correct adapter.
mounted in camera
The camera is in power saving mode and some camera operations cannot
be performed. Please press the shutter button halfway to exit the power
saving mode. The HDMI high-definition signal cable is disconnected; or the
No images are displayed
signal source is not turned on. Please reconnect and set up correctly.When
on the screen of this device
using a camera without a live view function, the captured images cannot be
displayed on this device. Please refer to the instruction manual of camera
for details.
This depends on the camera. When an HDMI high-definition signal cable is
No images are displayed
connected to this device, images may only displayed on the screen of this
on the screen of camera
device.
Please ensure that the volume of this device is not set to 0 before connecting
No sound can be heart
headphones. Make sure that the sound setting of camera is not set to OFF.
This depends on the camera. When it is connected to this device, it may
No photo can be captured
sometimes switch to playback mode.
Please switch the camera to capture mode before taking photos.
The screen is not clear outdoors
Block out the sun with a hood. Turn the backlight value of this device up.
Available signal format
This device supports the following signal formats:
Number
Number Frame
System Scanning Aspect ratio
of effective
of buses frequency
lines
575 / 50I ( PAL )
625 575 50
2:１ interlacing
480 / 60I ( NTSC ) 525 483 60
2:１ interlacing
576 / 50P
625 576 50
Sequential scanning
480 / 60P
525 483 60
Sequential scanning
640×480/60P 525 480 60
Sequential scanning
1080 / 50I
1125 1080 50
2:１ interlacing
1080 / 60I
1125 1080 60
2:1 interlacing
720 / 50P 750 720 50
Sequential scanning
720 / 60P
750 720 60
Sequential scanning
1080 / 50P
1125 1080 50
Sequential scanning
3840×2160/60P 2250 2160 60
Sequential scanning
Design or specifications are subject to change without notice.
9
Contents
User Manual
Operation precautions.......................................................................
Cleaning..............................................................................................
Introduction to functions...................................................................
Part identification...............................................................................
Installation of battery and adapter...................................................
Connection Method for High-definition Signal Cable.......................
Sunshade hood ..................................................................................
Touch screen operation......................................................................
Menu function.....................................................................................
Troubleshooting.................................................................................
Available signal format.......................................................................
Product specifications........................................................................
Firmware update.................................................................................
Operation precautions
Please read this User Manual and the operation instructions of camera
carefully.
1. Please use a compatible battery or power adapter.
2. Do not place any heavy objects on the screen to prevent loss of screen
uniformity.
3. Do not place this device near liquids, because it is not designed with
waterproof, splash-proof and dust-proof functions.
4. Do not place this device in the sun for a long time, or make it close to a place
with high temperature for a long time, so as not to cause deformation or
malfunction of machine.
5. Do not place the device in a place with excessive vibration, so as to protect it
from being damage after falling from a high place.
6. Do not place the device in a place with excessive electromagnetic strength
to avoid malfunction.
7. Do not place the device in a sandy place, so as to avoid malfunction caused
after being attacked by sand and dust.
8. Do not dispose of this device with general waste.
9. The top, ventilation holes and metal parts of this device may become hot
after it has been used for a long time. Please use it with care.
10. If the device is used in cold environments, horizontal lines or residual
images may appear on the screen. This is not a malfunction. The screen will
return to normal once the monitor warms up.
11. Please follow the regulations about the operation of this device on the
airplane in the take-off and landing process of airplane.
Parts identification
① ② ③ ④
⑥
⑦
⑧
⑩ ⑪ ⑫ ⑬ ⑭ ⑮
①Back/Menu Button ⑩HDMI Input
②Shortcut Key ⑪HDMI Output
③Display Screen ⑫1/4 Screw Hole
④Fan Exhaust Vent ⑬Headphone Jack
⑤USB Interface ⑭Type-C Port
⑥Power Button ⑮DC Port
⑦Signal indicator ⑯Battery Release Button
⑧Knob Key* ⑰Battery Slot
⑨1/4 Screw Hole ⑱Cooling Air Intake
* Note: ⑧Knob Key: Rotate up and down---Select key;
Middle key---Menu key/Enter key
Connection Method for High-definition Signal Cable
Connection of HDMI High-definition Signal Cable
1.Connect the device to the camera using the accompanied HDMI
(Please purchase extra HDMI cables if the HDMI high-definition signal cable is not long
enough.)
2.The image of camera viewfinder will be displayed on the screen of the
device after turning on the power switch of the camera and the device.
Please set it to AUTO or 16:9 if the camera is designed with an HDMI output
setting function.
HDMI IN
HDMI OUT(mini)
【Note】When connecting the device to the camera via an HDMI high-definition signal
cable, depending on the camera, the following may occur:
— The image may only be displayed on the device's screen, with no image shown on the
camera's screen.
【Tip】In the following situation, after a certain period, the screen will display a 'no signal'
message:
— The camera is not outputting a signal.
— HDMI high-definition signal cable is disconnected.
Sunshade hood
1. Put the device on the two bottom 2. To remove the sunshade,
brackets of the hood, and then pull the two top supports
gently buckle it up to complete the outward.
installation of hood.
Please open and close the hood in the steps below:
Press the button, and the sunshade
will open automatically.
【Wave form】
VolumeBar On/Off
Histogram Y Histogram (On/Off)
VectorScope On/Off
RGB Parade RGB Y
FullWaveform On/Off
Open USB:\ Luttable List
3D LUT
Image RGB(On/Off)
【Monitoring tool】
Red (0~10) Green (0~10)
Mode 1
0%~100%
Gray Red
On/Off
UnderScan
Flip-H
On/Off
On/Off
RGB Parade FullWaveform 3D LUT
Camera Mode (On/Off) WIT Mode (On/Off)
【Mark and composition】
Marker Color (White/Black/Red/Green/Blue)
Marker Trans(Off/Low/Medium/High)
80% 85% 90%
Centra
4:3 2.35:1
Auto 4:3 14:9 16:10 16:9 1.85:1 2.35:1 Full
1X 1.4X 2X
1X 1.3X 1.33X 1.5X
【Image】
Brightness 0%~100%
Contrast 0%~100%
Saturation 0%~100%
Hue 0%~100%
Sharpness 0%~100%
Backlight 0%~100%
Power
Color Temp 5600K 6500K
RGB Red(0~255) Green(0~255)
【System settings】
Language China
Fan Speed Auto Off Low
Volume 0%~100%
OSD Menu OSD Trans(OFF/Low/Medium/High)
F Key F1 F2
3D LUT
System
Reset Product Manual
Product specifications
Display Screen 7-Inch IPS Touch Screen
Resolution 1920×1080
Aspect Ratio 16:9
Contrast 1000:1
Refresh Rate 60Hz
Screen Brightness 2800cd/㎡
Viewing Angle 170°
Pixel Density 316PPI
Color Gamut SRGB
Color Depth 8Bit
Input Interface HDMI 2.0 IN
Output Interface HDMI 2.0 OUT
Cooling Fan Yes
Weight ≈348g (Monitor)
Dimensions 187.8×110.5×28.5mm
USB Interface Support of USB upgrade and 3D Lut file input
Audio Output Headphone Jack φ3.5mm
Power Interface DC 10V-18V 2A；Type-C≥9V 3A,(9V/12V/15V/20V 3A)
Applicable Battery Lithium Battery NP-F550/F750/F970
Working Temperature 0℃~40℃
Storage Temperature -20℃~60℃
HDMI: Type A
Input/ Output Signal : HDMI 2.0, supporting up to 4 K 60 Hz (4 K: 3840× 2160, 4096×2160)
Firmware update
1. Download the latest firmware from www.viltrox.com.
2. Extract and store the latest firmware in a removable USB drive.
3. Turn on the monitor and insert the USB drive into the monitor's USB
interface.
4. Go to the menu: System Settings ( ) → System → Firmware Update
→ Click 'Confirm', then automatically switch to the update interface.
5. Wait for the progress bar to load, and the system will automatically
shut down and restart after loading;
16 :9 / 4 :3
6. Logo will appear after automatic restart, and the firmware upgrade
16 :9 / 4 :3
will be complete.
16 :9 / 4 :3
16 :9 / 4 :3 Note: Please use a FAT32 formatted USB drive for upgrading.
4 :3
16 :9
16 :9
16 :9
16 :9
16 :9
16 :9
2
3
3
4
5
6
6
7
7 英寸专业 摄影监视 器
7
9
9
10
10
在使用本设备时, 请务必仔细阅读使用说明书。
请保管好本说明书, 以便日后能随时查阅。
请在充分理解内容的基础上, 正确使用。
深圳市爵影科技有限公司
电 话： +86-755-2877 9024
电邮:info@viltrox.com
地址： 广东省深圳市龙华区民治街道展滔大厦B栋12楼1207号
生产地址： 广东省惠州市惠阳区秋长街道桔园路52-1号斯迈欧科技园1栋3楼
2
清 洁
1. 清洁之前请务必先将电池取出。
2. 此显示屏表面经过特殊处理，可以减少反射光。维护不当可能会降低显
示器的性能。
3. 请使用柔软的干布（如清洁布或玻璃清洁布）轻轻擦拭屏幕或机壳。
⑤
4. 使用中性清洁剂，可以擦掉顽固污渍。
5. 请勿使用稀释剂、酒精等有机溶剂清洁本设备，以免损坏机壳和屏幕。
6. 请勿使用粗糙布料擦拭机壳，以免刮伤机壳表面。
⑨ 7. 如果机壳长时间与橡胶或乙烯树脂产品接触，机壳的表面涂层将会被破
坏或脱落。
功能介绍
DC-A1是一款7英寸专业摄影监视器, 分辨率为1920×1080像素;可用于具
有可更换镜头的数码相机或数码HD摄录一体机, 实时显示来自HDMI的高
清信号。监视器功能强大，为广大摄影师提供监视辅助系统，同时满足摄
影师对高清画质的摄影需求。
⑯
产品特点：
⑰
◎ 3D LUT功能：使用3D LUT，能够实现全立体色彩空间的控制，极大扩
⑱
充了显示器的色彩显示潜力，也是实现硬件校准所见即所得的坚实后盾。
本设备可通过 USB接口载入20个3D LUT文件。
◎ 音频柱：监测HDMI高清信号内的音频信号，实时进行高低不同的波形
切换。
◎ 陀螺仪功能：本设备具有陀螺仪检测，调整屏幕的上下方向，可以自
动进行图像翻转，无需手动调节，优化提高使用体验，更好的满足广大摄
影爱好者的需求。
◎ 亮度直方图：监测HDMI高清信号传入的图像亮度，根据图像的变化实
时捕捉显示亮度变化值。
◎ 伪彩功能：通过将图像转换进行更加精准的曝光与布光控制，红色为
光照过度，蓝色为光线不足，绿色为合适的光线环境。
◎ 聚焦功能：对画面区域进行聚焦设置。
◎ 反挤压功能：还原相机压缩变形的画面，显示实物原始的比例。
◎ 供电：DC适配器，锂电池，Type-C,三种供电模式随时切换，全方位满
足客户在不同的场景下的供电需求，无需等待单一电源。
◎ 快捷键：可根据客户的喜好设置不同的快捷键，满足一键设置，无需
进入菜单设置。
◎ 信号：本设备具有HDMI IN功能；同时自带HDMI OUT 输出功能，方便
现场其他监视器或设备连接，满足不同爱好者的外扩显示功能。
◎ USB接口：支持USB接口升级、3D LUT功能文件载入。
◎ 触摸屏：7英寸的灵敏触摸屏，方便不同爱好者对本设备的操作。
4 3
安装电 池 和 转 接 座
安装电池
本产品可用可充电锂电池。
电池型号可选择NP-F550/F750/F970等规格。
1. 沿所示的方向将电池轻轻向内按
压,然后向左滑动(不要松开)。
电池固定就位时会发出卡哒声。
安装转接座
1. 根据相机的热靴形状
选择转接座安装的方向。(
2. 将转接座的1/4螺丝对准本
设备的1/4螺丝孔。( )
②
3. 将转接座的转盘锁紧。( ③
4. 使 用 转 接 座:
① 沿图中所示的方向将转接座的底座完全插入通用
② 将转接座的转盘锁紧，从而将其固定在相机上。
①
注: 如果使用配有弹出式内置闪光灯的相机，应注意以下几点：
1.务必关闭相机的内置闪光灯。如果相机有内置自动闪光灯功能，
请将该功能关闭。
2.使用闪光灯之前，请将本装置从相机上卸下。
6 5
触屏操作
RGB Histogram (On/Off)
菜单：双击屏幕唤出菜单选项；单击空白处退出菜单模式。
YUV
In Use�
Table BGR (On/Off)
音量调节：
在屏幕左边，上下滑动调节。
Blue (0~10)
Mode 2
Green Blue
放大缩小：用手指（如图所示）放大缩小可观看细节。
OverScan
Flip-V
（放大缩小）
注： 在放大缩小的情况下， 不能双击出菜单， 需要等待 "放大缩小框" 消失后， 再次双击才能出菜单。
Marker Thick (1~3)
菜单功能
93% 96%
Trisection
开机/关机
1.85:1 9:16
【开机】
打开<⑥电源键>，3秒后信号指示灯亮绿灯，屏幕亮起。
4X 8X 10X
（*有信号时，信号指示灯常亮绿灯；没信号时常亮红灯。）
1.6X 1.8X 2.0X
【关机】
关闭<⑥电源键>,信号指示灯和屏幕熄灭。
菜单介绍
USB
7200K 9300K
【波形图】
Blue(0~255)
【监看工具】
【标注与构图】
【图像显示】
English
Medium High
【系统设置】
OSD Time (OFF/5s/10s/15s)
F3 F4
Update
8 7
故障排除
送修前, 应进行必要的检查。如果本设备仍无法正常工作, 请与经销商联系。
故 障
无法取出电池 电池未解除锁定 →按下电池释放键，然后取出电池。
电池电量已用尽 →更换电池。
本设备没有电
电源适配器( 未附带) 被断开，请重新进行正确连接。
无法将本设备
所用转接座的类型不正确，请选择正确的转接座。
安装至相机
相机处于节电模式下, 执行不了某些相机操作，请半按快
门按钮，从而退出节电模式。
本设备的屏幕上
HDMI高清信号线被断开；或信号源没有开启，请重新
正确连接与设置。
未显示任何影像
使用没有实时取景功能的相机时, 将无法在本设备显示
拍摄的影像, 有关详细信息, 请参阅相机的使用说明书。
相机的屏幕上 取决于相机, 当HDMI高清信号线与本设备连接时，
影像可能只显示在本设备的屏幕上。
未显示任何影像
连接耳机时, 确保本设备的音量未设为0。 确保相机的声音
听不到声音
设置未设为OFF( 关) 。
取决于相机, 当与本设备连接时, 有时它会切换到播放模式。
无法拍摄
请在拍摄照片前将相机切换到拍摄模式。
在户外屏幕看不清 使用遮光罩遮挡阳光。将本设备的背光数值调高。
可用信号格式
本 设 备 支 持 以 下 信 号 格 式 :
制 式 总线数
575/ 50I (PAL)
625
480/ 60I (NTSC)
525
576 / 50P 625
480 / 60P
525
640×480/60P 525
1080/50I 1125
1080/60I
1125
720 /50P
750
720 /60P 750
1080/50P 1125
2250
3840 × 2160/60P
10 9
目 录
产品说明书
使用须知...............................................................................................
清洁......................................................................................................
功能介绍...............................................................................................
部件识别...............................................................................................
安装电池和转接座................................................................................
高清信号线的连接方法.........................................................................
遮光罩..................................................................................................
触屏操作...............................................................................................
菜单功能...............................................................................................
故障排除...............................................................................................
可用信号格式........................................................................................
产品规格...............................................................................................
固件升级...............................................................................................
使用须知
请 仔 细 阅 读 本 使 用 说 明 书 及 相 机 的 使 用 说 明 书 。
1. 请使用兼容的电池或电源适配器。
2. 请勿将任何重物放置于屏幕上，以免屏幕失去均匀性。
3. 请勿将本设备放置于液体附近，本设备没有防水、防溅及防尘功能。
4. 请勿将本设备放置于阳光下长期暴晒，或者长时间靠近高温的地方，
以免机子变形或出现故障。
5. 请勿将本设备放置于振动过大的地方，以免摔坏机子。
6. 请勿将本设备放置于电磁强度过大的地方，以免出现故障。
7. 请勿将本设备放置于多沙的地方，以免受到沙尘的侵袭，导致故障。
8. 请勿将本设备与普通垃圾一起弃置。
执行标准： Q/JYKJ001-2019
传 真:0755-2877 4730
9. 经过长时间使用后，本设备的顶部、通风孔及金属部件可能会变热，
网址: www.viltrox.com.cn
请小心使用。
10. 如果在寒冷的环境下使用本设备，屏幕上可能会出现水平线或残留影像，
这不属于故障。当监视器变暖后，屏幕会恢复到正常状况。
11. 在飞机上使用，起飞和着落过程中，请遵守飞机上有关本设备的规定。
部件识别
*注：⑧旋钮键：上、下旋转→是选择键；中间按钮→是菜单键/确认键。
高清信号线的连接方法
HDMI高清信号线的连接
1. 利用附带的HDMI高清信号线，将本设备连接到相机上。
(如果HDMI高清信号线长度不够 , 请另购其他尺寸的HDMI线)
2. 打开相机及本设备的电源开关, 相 机取景器的影像将显示在本设备的屏幕
上。如果相机具有HDMI输出设置功能，请将其设为AUTO(自动)或16:9。
2. 取出电池。按住电池释放键的
同时，向右滑动电池，然后将
电池取出。
【注 意】通过HDMI高清信号线将本设备连接至相机时, 取决于相机, 有时会出现下
注：取出时,小心不要将电池掉到地上。
列情况:
⸺ 影像可能只显示在本设备的屏幕上，相机的屏幕未显示任何影像。
【提 示】在下列情况,经过一定时间后,屏幕提示无信号：
⸺ 相机没有输出信号。
⸺ HDMI高清信号线被断开。
①
① )
遮 光 罩
②
1. 把本设备放在遮光罩的两个底托上，
再轻轻往上扣，遮光罩就安装完成。
③
)
热靴 座 中。
请按图中所示打开和关闭遮光罩:
②
【波形图】
背光调节：
在屏幕右边，上下滑动调节。
【监看工具】
（方框消失） （再次双击）
【标注与构图】
【图像显示】
电池
信号源
电量
【系统设置】
产品规格
显示屏
屏幕分辨率
原 因 及 措 施
屏幕比例
屏幕对比度
刷新频率
屏幕亮度
视角
像素密度
屏幕色域
色彩位深
输入接口
输出接口
散热风扇
产品重量
产品尺寸
USB接口
音频输出
电源接口
适用电池
工作温度
存储温度
HDMI插座接口：A型
输入、输出信号接口版本：HDMI 2.0，最高支持4K60HZ(4K:3840×2160、4096×2160)
固件升级
1.从www.viltrox.com.cn下载最新固件；
2.将最新固件解压和存储到可移动U盘内；
有效
帧 频 扫 描 纵横比
3.打开监视器，然后将U盘插入监视器的USB接口；
线数
4.操作菜单：系统设置(
2:１隔行扫描
575 50 16:9 / 4:3
跳转到更新界面；
5.等待进度条加载完成，加载完成后系统会自动关机和重启；
483 60 2: １隔行扫描 16:9 / 4:3
6.自动重启后logo出现，固件升级完成。
576 50 逐行扫描 16:9 / 4:3
逐行扫描 注：请使用FAT32格式的U盘进行升级。
483 60 16:9 / 4:3
480 60 逐行扫描 4:3
1080 50 2:１隔行扫描 16:9
2:１隔行扫描
1080 60 16:9
720 50 逐行扫描 16:9
720 60 逐行扫描 16:9
逐行扫描
1080 50 16:9
2160 60 逐行扫描 16:9
设计或规格如有变动, 恕不另行通知。
2
3
3
4
5
6
6
7
7
9
9
10
10
2
① ② ③ ④ ⑤
⑥
⑦
⑨
⑧
⑩ ⑪ ⑫ ⑬ ⑭ ⑮
⑯
⑰
⑱
①返回键/菜单键 ⑩HDMI 输入
②快捷键 ⑪HDMI 输出
③显示屏 ⑫1/4螺丝孔
④风扇出风口 ⑬耳机接口
⑤USB接口 ⑭Type-C接口
⑥电源键 ⑮DC接口
⑦信号指示灯 ⑯电池释放键
⑧旋钮键* ⑰电池卡槽
⑨1/4螺丝孔 ⑱散热进风口
4
HDMI IN
HDMI OUT(mini)
2. 将遮光罩上方的两个顶托
向外拉，从而将其卸下。
按一下按键，
遮光罩会自动打开。
6
音频柱 开/关
直方图 亮度直方图(开/关) RGB直方图(开/关)
矢量图 开/关
Parade RGB Y YUV
全波形 开/关
打开USB:\ 3DLUT 列表 使用中的...
3D LUT
图像红绿蓝(开/关) LUT表蓝绿红(开/关)
红(0~10) 绿(0~10) 蓝(0~10)
模式1 模式2
0%~100%
黑白 红 绿 蓝
开/关
欠扫描 过扫描
横向翻转 纵向翻转
开/关
开/关
相机模式(开关) 图传模式(开关)
辅助线颜色(白/黑/红/绿/蓝) 辅助线宽度(1~3)
辅助线透明度(关/低/中/高)
80% 85% 90% 93% 96%
中心标记 三分法
4:3 2.35:1 1.85:1 9:16
自动 4:3 14:9 16:10 16:9 1.85:1 2.35:1 满屏
1X 1.4X 2X 4X 8X 10X
1X 1.3X 1.33X 1.5X 1.6X 1.8X 2.0X
亮度 0%~100%
对比度
0%~100%
饱和度
0%~100%
色偏色调
0%~100%
锐利度
0%~100%
背光调节
0%~100%
色温调节
5600K 6500K 7200K 9300K
RGB
红(0~255) 绿(0~255) 蓝(0~255)
语言 中文 英文
风扇速度 自动 关 低 中 高
音量 0%~100%
OSD菜单 OSD透明度(关/低/中/高) OSD时间(关/5S/10S/15S)
快捷按键 F1 F2 F3 F4
系统 系统复位 产品说明 固件更新
8
7英寸IPS触摸屏
1920×1080
16：9
1000：1
60Hz
2800cd/㎡
170°
316PPI
SRGB
8Bit
HDMI 2.0 IN
HDMI 2.0 OUT
有
≈348g (裸机)
187.8×110.5×28.5mm
支持USB接口升级，3D Lut文件导入
耳机接口φ3.5mm
DC 10V-18V 2A；Type-C≥9V 3A,(9V/12V/15V/20V 3A)
锂电池NP-F550/F750/F970
0℃~40℃
-20℃~60℃
)→系统→固件更新→点击"确认"，然后自动
10