Werbung
Bringing the bobbin thread up (illustration 33)
Whenyou havethreadedthe upperthread through the needleyou can bring the bobbin
thread up by turning the flywheel towards yourself. Turn so far until the needle has made an
upward movement in once and the needle is again in its highest position.
2 Then pull the upper thread until you see the bobbin thread come up.
3 Pull both the top and the bobbin thread backwards15cm,as is shown in picture 3.
Straight stitch and zigzag stitch
PRESSURE
FOOT
Zigzag foot
Turnthe wheeluntil the needleis in its highest position and lift the pressurefoot up.
While holding the threadswith your left hand,you turn the wheeltowardsyourselfto get
2
the needle in the material at the right spot. Here you begin to sew.
Sewa number of stitches backwardsby keeping the button for "sewing backwards"
3
depressed.
Stop the machine and turn the wheel to bring the needle down into the material. Lift the
4
pressurefoot up.(illustration 34)
Turnthe materialaroundthe needleto get the desireddirection. (illustration35)
5
6
Lower the pressure foot and continue sewing.
Toremovethe material,you bringthe needleto the highestposition,you lift the pressure
7
foot up and pull the material awayfrom you.
Usethe threadcutter at the backof the pressurefoot holder,as is shown in the picture.
8
(illustration 36)
Leaveabout 15cmof yarn length on the work.
9
Tricot
stitch
PRESSURE
FOOT
Zigzag foot
Place thematerial u nderthe pressure foot so that thereis a narrowedgeon the righthandside
of the pressurefoot. Guideit so that the stitchesfall on the edgeof the material.
(illustration 37)
Forked
stitch
PRESSURE
FOOT
Zigzag foot
With this mannerof sewing,seamsareelastic and materialscan bejoined togetherfirmly. Use
the forkedstitch for examplefor sewingbathing suits andas a decorativestitch.
CHOICE
OF PATTERN
1 Straight
"2"
Stitch
Zigzag Stitch
CHOICE
OF PATTERN
CHOICE
OF PATTERN
"ss
STITCH
LENGTH
0.3 —4
STITCH
LENGTH
0.3—4
STITCH
LENGTH
English
AIGGER
33
Werbung
