Meross MSS425FHK Bedienungsanleitung Seite 6

Go to Account-> Google Assistant and follow the
step-by-step instructions to complete the linking process.
FAQ
At Meross, we strive to assure your satisfaction. Attached
below is a non-exhaustive list of questions that users are
mostly concerned about.
1. What devices can I control with the Smart Surge Prote-
ctor?
You can control lights, fans, humidifiers, portable
heaters, and any small appliances in accordance with
the MSS425F's specifications (up to 10A output).
2. What if I can't control the smart device with the Meross
app?
You can troubleshoot the following:
- Check if your home Wi-Fi is working properly.
- Make sure that you have disabled access control in your
router and that the smart device is not blocked by the
router's firmware.
- Factory reset your smart device and try to add it again.
3. My Home app can't add the device by scanning the QR
code.
You can tap "Don't Have a Code or Can't Scan" and input
the code manually.
4. I can't pair my device with HomeKit anyhow.
Please make sure your iOS is connected to the 2.4GHz
home Wi-Fi and you are having iOS 13 or above. Restart
your iOS will help due to some system cache issue.
Warranty
4