MonsterShop Ford Transit Custom Toolbox Van Racking Bedienungsanleitung Seite 6

USER GUIDE
ASSEMBLY INSTRUCTIONS
6. Secure the Back Panels (C) and the Shelves (G) together by using the screws provided
into the pre-drilled holes at the back of the Back Panels (C).
7. To complete the assembly of the van racking, take the Front Compartment Panel (F) and
screw it into the designated slots on the Side Panels (B) where the pre-drilled holes are
found.
7
8. Use the Dividers (A) to customise the top compartment as you see fit!
06
7