MonsterShop Ford Transit Custom Toolbox Van Racking Bedienungsanleitung Seite 5

USER GUIDE
ASSEMBLY INSTRUCTIONS
1. Ensure you have all the parts required to assemble the Toolbox Van Racking.
2. Start by inserting the Back Panels (C) and the Shelves (G) into the designated slots in
one of the Side Panels (B).
3. Once these are slotted in securely, insert the Back Compartment Panel (D) and the
Bottom Compartment Panel (E) in the same way that you did with the Back Panels (C)
and the Shelves (G).
4. Next, take the remaining Side Panel (B) and align it on the other side of your shelves.
Slot the Side Panel (B) in place as done in the previous steps.
5. You should now have the racking standing by itself. Secure the shelves and panels by
using the screws provided, as shown below. The Side Panels (B) have pre-drilled holes
indicating where the screws should go.
5
29851 - FORD TRANSIT CUSTOM TOOLBOX VAN RACKING
05