Romoss RM1200 Benutzerhandbuch Seite 11

•
Using the Lamp:
Press the lighting button to activate the built-in lamp at full brightness.
o
Pressing it a second time will switch to half-brightness mode. Press the button
a third time to enable the SOS signaling mode.
To turn off the lamp or deactivate SOS mode, press the button a fourth time
o
or hold the button for a few seconds.
Note: The battery may enter Sleep Mode after prolonged storage or transportation. Charge
the product for approximately 10 minutes to activate the battery. For optimal results, fully
charge the device before initial use.
How to Charge the Product
Method 1: AC Charging
•
Connect the AC charging cable to an AC output port and plug the other end into the
device's AC input.
•
Ensure the connection is secure for a stable charging process. This is the fastest
charging option for home or office use.
AC Output Port
AC Charging Cable
11
ROMOSS RM1200