Control Panel And Display; One-Touch Beverage Buttons; Navigation Buttons - Philips Saeco PICOBARISTO HD8925 Benutzerhandbuch

number of red squares

Control panel and display

One-touch beverage buttons

Navigation buttons

Escape button: press this button
to return to the main menu.
Ok button: press this button to
select, confirm or stop a function.
measured water hardness is different, adjust the setting in the machine
menu.
1 Immerse the water hardness test strip (supplied with the machine) in tap
water for 1 second.
2 Remove the water hardness test strip and and wait for 1 minute.
3 Check how many squares have turned red and check the water hardness
in the table below.
value to be set
1
2
3
4
4 Press the MENU button, select menu and scroll to select water hardness.
Select the preferred water hardness setting and press the OK button to
confirm.
This espresso machine has a self-explaining display for easy use. Read the
sections below for a quick explanation of the buttons.
Use the one-touch beverage buttons (ESPRESSO, ESPRESSO LUNGO,
CAFFÉ CREMA, CAPPUCCINO and LATTE MACCHIATO) to quickly prepare
one of the preset beverages.
- Make sure that the milk carafe is in place and prepared for use when you
select cappuccino or latte macchiato (see the separate quick start guide).
- Note: If you want to stop the brewing process before the machine has
finished dispensing the preset coffee volume, press the OK button or the
previously selected beverage button.
- You can adjust the volume of espresso or espresso lungo.
- After preparing a milk-based beverage, the machine starts the QUICK
CARAFE CLEAN procedure.
Use the buttons described below to navigate through the menu:
English
water hardness
very soft water
soft water
hard water
very hard water
Up button: press this button to
scroll up through the display
menu.
Down button: press this button to
scroll down through the display
menu.
9