Werbung
Verfügbare Sprachen
Verfügbare Sprachen
86628 en Dampfbuerste v3 21.04.16 11:27 Seite 19
m
To release steam continuously, you can lock the steam jet
button in place.
5.
Once the water tank is empty, press the On/Off button
appliance.
6.
Unplug the mains plug from the wall socket.
The steam brush is now ready for use.
Smoothing garments with the brush head
m
Get the appliance ready for use as described in the section "Preparing the
steam brush for use".
• Always test the appliance on a concealed part of the cloth first.
• With sensitive fabrics such as wool, wool mixtures, corduroy, velvet and
silk, apply the steam at some distance from the fabric.
• For better steam emission you can also use the steam brush without the
brush head.
1.
Hang the garment you wish to steam brush on a coat hanger. Hang trousers
by the end of the trouser legs.
2.
Plug the mains plug into a wall socket and press the On/Off button
Wait until the indicator light
to switch off the
.
lights up continuously.
3.
When the steam jet button is pressed, water is pumped into the heating
system and emitted from the nozzles as steam. This steam deeply pene-
trates the fabric.
m
Once the water tank is empty, switch off the appliance and let it cool down.
Refill the water tank before switching it on again.
4.
Once the garment has been sufficiently smoothened, press the On/Off button
to switch off the appliance.
5.
Remove the mains plug from the wall socket before storing the appliance.
Also empty the water tank if necessary before storing the appliance.
6.
Let the garment dry on the hanger.
Removing fluff with the fluff brush
m
Replace the brush head with the fluff brush (see section "Preparing the
steam brush for use").
m
Then proceed as described in the section "Smoothing garments with the
brush head".
19
19
Pull the fabric taut with your free hand.
Applying slight pressure, put the appliance
on the spot that is creased. Briefly press the
steam jet button and then release it.
Move the appliance downwards over the
garment and smoothen it with the attached
brush. While doing so, repeatedly press the
steam jet button. You can also lock the steam
jet button in place in order to emit steam
continuously.
Werbung
