Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Use Tips On Remote Control
• The remote control distance is within 49.2ft.
• The remote controller requires two AAA batteries.
• Pairing is not required before using.
• The back of the remote controller is magnetic and can be attached to a floor lamp
pole or any other metal object.
• lf the remote control fails to work, please re-pair the remote and lamp with the
following methods:
1. Turn on the power switch;
2. Unplug the power cord 5 times in a row and reconnect it, the floor lamp will flash
quickly about 3-5 seconds, and then you can Long press the "
Lamp) of the remote about 3 seconds within 1 minute until the light flickers twice,
and then the remote has been successfully re-paired.
off-on-off-on-off-on-off-on-off-on
• lf you want to cancel the pairing between the controller and the floor lamp. Please
turn off-on-off-on-off-on-off-on-off-on the power, then the light flickers and the
cancellation is completed.
• There is a magnet on the back of the remote controller, which can be adsorbed on
any iron metalsurface such as floorlamp pole.
off-on-off-on-off-on-off-on-off-on
5
" button (Main-
Werbung
