Seite 1
R1500 RLLPOWERS@ Portable Power Station Model:R1500 RLLPOWERS The products and materials described in this manual will be changed at any time due to technical upgrades. The company reserves the final right to change and explain the contents of the manual.
1.Safety Instructions This product is an power station battery, please make sure to take basic precautions, be sure to take basic precautions including: I. Be sure to operate the product in a dry and well ventilated place, and if it gets wet, dry it thoroughly before use.
Seite 4
Input Ports AC Input: (100-120)V-15A Max, (220-240)V-6.8A Solar Input: 13A, 650W Max Car Charger Input: 12V/24V DC Output Ports AC output 100-120V/220-240V 1800W Max (Surged 3000W) USB-A*2: USB-C*2: 5/9/12/15V=3A, 20V=5A, 200W Max Car Port: 12V=: IOA,120W Wireless Charger*2: 30W Max Battery Info Battery Type: LFP Lithium...
3.User guide 3.1 Product appearance introduction Wireless USB-A*2Output LCDDisplay +0utput15VV: Overload protector Wireless Charger* 2 USB-C*2Output Car Port Output RLLPOW AC*4 Output Power On/Of Extra Battery AC Input Connector* DCOn/Off Solar/Car Input AC on/0f 3.2 Introduction of Display (Touch) Icons —ozoZlNPUT n OUTPUT M ins...
After confirming that the product is not faulty, turn on power protection switch, the product resumesuse. Pleaseuse the original standard ACcharging cable of the product, ALLPOWERS w ill not bear any damage caused by the use of other unofficial charging cables bear any responsibility. Pleaseconnect directly to the wall power socket.
* To avoid the powerstation being in a low voltage, please charge it within 24 hours when the power is less than 3.4 Solar charging Users can charge the product by connecting solar panels in series as shown in the figure. ALLPOWERS Solar Panel XT60 650W...
3.5 Smart Extra Battery This RI 500 can use ALLPOWERS Smart Extra Battery for capacity expansion, and can support the superposition of 2 battery packs at most. When using this product for extra battery connection, please connect it according to the specifications of the user manual.
When fully charged, the power grid supply directly supplies power to the device. Normally The electrical appliances Power Power cut off The R1500automatically powers the device. RL LPOWERS The electrical appliances Power outage 3.7 APP operation guide 3.7.1 download: Use your mobile phone to scan the QR code below to download and install the APP Android...
Seite 10
3.7.2 Bluetooth connection power station: (j) Confirm that the power station and mobile phoneBluetoothare turned on; The way to turn on Bluetooth. See "4.FAQ: QI O" @CIick the O icon in the Bluetooth device bar on the mobile APP to enter the Bluetooth connection interface...
Seite 11
3.7 3 WIFI connection: (j)Click the data on the power station, and click the ALLPOWERS name to pop up the WIFI connection QR code;The way to turn on WIFI. See "4. FAQ: Q10"; @Click the O icon in the WIFI device bar on the mobile APP to enter the WIFI connection interface;...
Seite 12
3.7.4 Mobile APP Operation Instructions AP RI 500 V2.o Display output remaining time emaining time 3h50min 1dayl 9h Display remaining erne g power battery capacity Display Input Output Display input output power power 220V/l 220V/1 IOV AC switch DC switch DC 12V Frequency 50hz...
Seite 13
(1) Charging power working mode setting: can be set to Fast Mode/Standard Mode/Mute Mode; (2) Operation mode setting, set to power saving mode, you can set the AC or DC off time to I hour or 2 hours , 4 hours, 6 hours, the power station...
30% and recharge to 60% every three months prolong the service life of this product. Q7. Can this product be brought on the plane? Q8.Can the R1500 be charged while using? Yes, the product supports simultaneous charging and discharging.
5. Troubleshooting The fault code is displayed at the position (9 of the display screen, and the related fault type and recovery method are asfollows. Indicator Problem Solution • Charging low temperature Automatic recovery after ambient temperature E102 protection : recovery : Stopcharging,check the productvents is : Charging high temperature E103...
If it is updated, revised or terminated without prior notice, please visit the ALLPOWERS official website for the latest product information. This product is not intended for use in applications that require extremely high reliability and...
Seite 17
R1500 V3.1 RLLPOWERS@ Portable Power Station Model:R1500 RLLPOWERS Die in diesem Handbuch beschriebenen Produkte und Materialien können aufgrund technischer Verbesserungen jederzeit geändert werden. Das Unternehmen behält sich das letzte Recht vor, den Inhalt des Handbuchs zu ändern und zu erläutern...
Seite 18
INHALT I .Sicherheitshinweise 2.Spezifikationem 3.Benutzerführung Produktdetails 3.2 LCD Anzaige 3.3 AC Ladung 3.4 Solar Ladung. 3.5 Intelligente Zusatzbatterie 3.6 UPS Funktion (unterbrechungsfreie Stromversorgung) 3.7 APP Bedienungsanleitung 4. FAQ (14) Fehlerbehebung (15) 6. Lieferumfang 7. Erklärung (16) Kontakt (16)
I.Sicherheitshinweise Bei diesem Produkt handelt es sich um eine Powerstationbatterie. Treffen Sie grundlegende Vorsichtsmaßnahmen, einschließlich: 1. Achten Sie darauf, das Produkt an einem trockenen und gut belüfteten Ort zu betreiben, und wenn es nass wird, trocknen Sie es vor dem Gebrauch gründlich ab. 2.
Seite 20
Eingänge AC-Ladung: (220-240)V-6.8A Solariadung: 13A, 650W Max Autoladegerät: Unterstützt 12 V/24 V DC Ausgänge AC (*4): 220-240V 1800W Max (Surged 3000W) USB-A Fast Charge (*2): 1.5A,36W Max USB-C (*2): 5/9/12/15V=3A, 20V=5A, 200W Max Car Cigarette: 12V= IOA, 120W Max Drahtloses Ladegerät(*2): 30W Max Informationen Akku Batterietyp:...
Leistungsschutzschalterauslöst. Nachdem Sie sich vergewissert haben, dass das Produkt nicht fehlerhaft ist, schalten Sie den Netzschutzschalter ein, das Produkt nimmt die Verwendung wieder auf. Bitte verwenden Siedas Original Standard AC-LadekabeIdes Produkts. ALLPOWERS ü bernimmt keine Verantwortung für Schäden, die durch die Verwendung anderer inoffizieller Ladekabel verursacht werden.
24 Stunden auf, wenn die Leistung weniger als 5% beträgt. 3.4 Solar Ladung Benutzer können das Produkt aufladen, indem sie Solarmodule in Reihe schalten, wie in der Abbildung gezeigt. ALLPOWERS Solar Pane XT60 650W (12-95V) Wenn Sie dieses Produkt zum Aufladen von Solarmodulen verwenden, schließen Sie es bitte gemäß...
3.5 Intelligente Zusatzbatterie Dieser RI 500 kann ALLPOWERS Smart Extra Battery zur Kapazitätserweiterung verwenden und kann die Uberlagerungvon maximal2Akkus unterstützen. Wenn Sie dieses Produkt für den Anschluss einer zusätzlichen Batterie verwenden, schließen Sie es bitte gemäß den Spezifikationen des Benutzerhandbuchs an...
Normalerweise Bei voller Ladung versorgt das Stromnetz das Gerät direkt mit Strom. RL LPO Die Elektrogeräte Der R1500 versorgt das Gerät automatisch mit Strom. Stromausfall R L L POWERS Die Elektrogeräte Stromausfall 3.7 APP Bedienungsanleitung 3 7.1 herunterladen: Verwenden Sie Ihr Mobiltelefon, um den QR Code unten zu scannen, um die APP herunterzuladen zu installieren.
Seite 26
3.7 2 Bluetooth-Verbindung Powerstation: (i) BestätigenSie, dass das Powerstation und das Bluetooth des Mobiltelefons eingeschaltet Sind; So aktivieren Sie Bluetooth. Siehe "4.FAQ: QIO"; @KIicken Sieauf das Symbol O in der Bluetooth-Geräteleiste in der mobilen APP,um die Bluetooth-Verbindu ngsoberfläche aufzurufen @Klicken Sie auf Weiter, um zu scannen und nach Powerstationen zu suchen @WähIenSie das entsprechende Powerstation aus und klicken Sie, um eszu verbinden @ Nacherfolgreicher Verbindung Wird APR1500V2.0in der Bluetooth-Geräteleiste angezeigt •vRlSOOv:.
Seite 27
WIFI Verbindung: @Klicken Sie auf die Daten des Powerstation und dann auf den Namen ALLPOWERS,um den QR Code für die WIFI-Verbindunganzuzeigen.Soschalten Sie WIFIein. Siehe "4.FAQ:QIO"; @KIickenSie auf das Symbol O in der WIFI-Geräteleistein der mobilen APP,um die WIFI-Verbindungsschnittstelleaufzurufen; @WähIenSie das tragbare Kraftwerk aus, um die Verbindungsseite aufzurufen @ Klicken Sie auf Scannen, scannen Sie den QR-Code auf dem Gerät, um das Gerät zu verbinden und...
Seite 28
3.8.4 Bedienungsanleitung für die mobile APP AP RI 500 V2.O Restzeit Ausgabe anzeigen leibende 3h50min I dayl 9h Verbleibende Batteriekapazität anzeigen Ejngang Ausgang Ausgangsleistung Eingangsleistung anzeigen anzeigen AC-Schalter 220V/1 IOV 220vn 1 ov DC-Schalter DC 12V TYPEC Optionen zur Frequenzumschaltung 60hz (12)
Seite 29
(1 ) Einstellung für den Arbeitsmodus der Ladeleistung: kann auf den Schnellmodus Standardmodus / Mute-Modus eingestellt werden; (2) Einstellung des Betriebsmodus, eingestellt auf Energiesparmodus, können Sie die AC- Oder DC-Ausschaltzeit auf 1 Stunde Oder 2 Stunden, 4 Stunden, 6 Stunden einstellen, das in diesem Modus...
4. FAQ QI. Welchen Batterietyp verwendet das Produkt? Dieses Produkt verwendet hochwertige Lithium-Eisenphosphat-Batterien (LFP). Q2. Welche Ausrüstung kann der AC-Ausgangsport des Produkts tragen? Der Wechselstromausgang dieses Produkts hat eine Nennleistung von IOOV-120V 1800W (Spitze 3000\N) Oder 220V-240V 1800W (Spitze 3000W), die die meisten Haushaltsgeräte mit Strom versorgen...
5. Fehlerbehebung Der Fehlercode Wird an Position @ des Anzeigebildschirms angezeigt, und der zugehörige Fehlertyp und die Wiederherstellungsmethode sind wie folgt. Fehlercode . Lösung Ladeschutz bei niedriger : Remove abnormal load and manually tum E102 on DC again Temperatur UnterbrechenSie den Ladevorgangund prüfen Sie, 0b die Entlüftungsöffnungen des Produkts E103 Lade-Hochtemperaturschutz...
Brände Oder Fehlfunktionen des Geräts Oder der Geräte, durch Ausfall dieses Produkts verursacht werden. 8. Kontact Wenn Sie Fragen haben Oder Hilfe zu unseren Produkten und Dienstleistungen benötigen, senden Sie bitte eine E-Mail an support@allpowers.com Unsere offizielle Website: www.allpowers.com (16)