Clean Air Optima RVC-001B Smart Gebrauchsanweisung Seite 12

Charging
Place the charging station against the wall and on a hard, flat surface. Don't place the charging
station in direct sunlight.
Give the charging station a free space of about 30 to 50 cm on the left and right.
Provide a clear view of the charging station at the front from one meter to one and a half
meters. Make sure the area around the dock or charging station is clear so that the device can
navigate easily.
Warning: To prevent your robot from falling down stairs, make sure the Charging Station is
at least 1.2 meters away from the stairs.
There are 2 options to charge the robot
vacuum cleaner:
1. Connect the adapter to the charging
station and plug it into the socket.
2. Use the power adapter to charge.
The adapter can be connected directly
to the robot. The adapter input is
located next to the power on/off button.
During charging, the indicator light
flashes. Once charging is complete,
the indicator light turns green.
During the cleaning process, the robot vacuum cleaner may conclude that its battery
power is insufficient and automatically enter the charging mode to find the charging station for
charging.
You can also instruct the robot vacuum cleaner to enter the charging mode with the charging
button on the remote control or via the APP.
Pay attention to charging:
1. The charging station cannot be used in an environment with strong reflection, such as
direct sunlight or nearby mirrors.
2. The charging time is about 6 hours.
3. When charging, do not install the water tank on the robot vacuum cleaner, to ensure the
safety of charging and prevent wet mops from damaging the floor.
Please fully charge the robot vacuum cleaner before first use.
If the charging station is moved, the robot may lose positioning and the map. Then when the
robot is restarted, it will rebuild and remember the map.
12