Machine Details; Main Switch - Duni Duniform Df 20 Handbuch

Machine details

A

Main switch (

B Button for setting the sealing time (
C Button for setting temperature (
D Indicator for sealing time (1 indicates
1 sec, subsequently in steps of 0.5 sec)
E Indicator for temperature (°C)
1 Sealing lid handle
2 Overheat switch
3 Sealing lid pressure spring
4 Adjustment nut
5 Film cutter
6 Back cover
7 Pressing system
8 Transmission belt
17 Roll steering ring
18 Roll holder
19 Lid stopper
Daily Operation Guide
1 Put the fi lled tray in the cassette.
2 Pull the fi lm over the tray.
3 Pull down the sealing lid, using the handle.
4 Hold the lid steady until the motor starts.
5 Let go of the handle when the motor starts.
6 When the tray is sealed, the lid opens automatically
and you can remove the tray.
2
/ )
ON OFF
TEMP
The letters and numbers refer to
the illustrations on the cover fl ap.
)
SEAL
)
9 Motor
10 Electronic card
11 Sealing lid lifting spring
12 Cassette
13 Film cutting edge
14 Film holder
15 Sealing plate
16 Sealing lid
20 Button for setting temperature (°C)
21 Button for setting the sealing time
22 Main switch
See illustrations on cover fl ap