Step 4: Enter generic pass code" 1234" to associate
(Pair") and connect the car kit with phone.
Step 5: Once you have entered the pass code, your
phone is the standard device for this car kit.
This car kit's LCD display shows "PAIRED".
Then, LCD shows Hans-free Profile or Headset
profile. Also, LCD display shows the name of the
paired phone. Pairing has been completed
successfully.
How
to disconnect
Method
I : Press
L button
once.
Method 2 : Switch off this car kit
Method 3 : Switch off your phone
Method 4 : Movethe phone 10 meters away from this
car kit
How
to re-connect
Method
I : Press
L button
once.
Method 2: Fromphone'sBluetooth menu.
Answer incoming calls
• Press (9) button.
• Press phone Answer call button.
Reject and hang up a call
• Press(8) button to reject or hang up.
• Or Press phone hang up button to endthe call.
6
6
Volume up and down
•
Press
+to
increase
volume
•
Press
- to decrease
volume
Mute Mic during conversation
• PressLto mute the mic. The display show "Mute On".
The mic is off.
• Press L again, the mic is on, display shows "Mute
off". The mic is automatically switched on once call
has been completed.
Call waiting
In conversation
with 1st call, a new 2nd calls come in.
• Press (9) to activate 2nd call, keep 1st call waiting
• Press(9)againto re-activate 1st call and hold 2nd call
waiting
• Press(8) hang up 1stcall and reactivate 2nd call
• Press(8) againto hang up 2nd call.
Call transfer
• Press C once to transfer
the calls from car kit to
phone.
• PressConce more to transfer calls from phoneto car
• For Nokia phones, press L to transfer calls from phone
to car kit.
Voice dialing
Press and hold C 2 seconds until you hear a tone that
indicates it is ready for speech recognition. Say the
desired name. The phone replays the desired name and
dials the related phone number.
Note: This voice dialing function is available for phones
supporting voice dialing.
Making a call from 10-Received calls memory ORfrom
10 last Missed
calls
• Press and hold (9) 2 seconds, display shows
"Call
Rec. Received
"
• Press + or —to select the telephone number you dial.
Press(9) to make an outgoing call.
Display Set up Menu
• Press and hold L for 2 seconds to enter setup menu.
• + Or — : forward/backward
• Press (9) confirm selection
• Press (8) exit
Display setup flowchat
7
7