Samsung PS50A417C2D Bedienungsanleitung Seite 54

Setting Up the Remote to Operate Your DVD
1 Turn off your DVD.
 Press the DVD button on your TV's remote control.
 Press the SET button on your TV's remote control.
4 Using the number buttons on your remote control, enter three digits
of the DVD code listed on page 57 of this manual for your brand of
DVD. Make sure you enter three digits of the code, even if the first
digit is a "0". (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of DVD. If no
other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in DVD mode, the volume buttons still
control your TV's volume.
Setting Up the Remote to Operate Your Set Top Box
1 Turn off your STB.
 Press the STB button on your TV's remote control.
 Press the SET button on your TV's remote control.
4 Using the number buttons on your remote control, enter three digits
of the STB code listed on page 56 of this manual for your brand of
STB. Make sure you enter three digits of the code, even if the first
digit is a "0". (If more than one code is listed, try the first one.)
5 Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of STB. If no
other codes are listed, try each code, 000 through 074.
Note on Using Remote Control Modes: STB
When your remote control is in STB mode, the volume buttons still
control your TV's volume.
English - 54
Continued...