Adler europe AD 2318 Bedienungsanleitung Seite 6

DESCRIPTION OF THE EQUIPMENT
1. Indicator light
3. Plates
5. Temperature control knob 150 ° C - 230 ° C 6. Infrared function LED display
USE
To achieve the best result in straightening hair, use the device on washed, combed and dried hair.
1. Fully uncoil the electrical cord before starting the device.
2. Insert the plug of the cord into an electrical outlet.
3. Turn on the straightener with the switch (4). The LED display (6) lights up continuously during operation to indicate
that the infrared function is active. Set the required temperature with the knob (5).
4. Wait 3-5 minutes for the device to reach the desired temperature.
5. Starting from the top of the head, select a small strand of hair and even it out by combing.
6. Then place the strand between the heating plates (3)
7. Move slowly in the direction from the roots to the ends of the hair.
CAUTION: The device is hot during operation. Do not touch the plates to the scalp or hands.
8. Repeat the operation with successive strands of hair until all are straightened.
9. Allow hair to cool and comb it out.
10. When finished working, turn off the straightener by pressing the off button (4), then unplug the power cord from
the outlet.
CLEANING
1. Before cleaning the device, unplug it from the power outlet and wait for the straightener to cool down.
2. Clean the housing of the device with a damp cloth. Do not immerse the device in water or other liquids.
3. Do not wind the power cord on the device.
TECHNICAL SPECIFICATIONS
Power supply: 220-240V~ 50-60Hz
Power: 35W
Maximum power: 120W
For the sake of the environment. Information about waste electrical and electronic equipment In accordance with Article 13(1) and (2)
of the Law of September 11, 2015 on waste electrical and electronic equipment, we inform you about the proper handling of waste electrical
and electronic equipment:
1. It is forbidden to place waste electrical and electronic equipment together with other waste - this is confirmed by marking in the form of a
"crossed out basket", ordering selective collection of this type of waste.
2. Electrical and electronic equipment may contain hazardous substances, mixtures and components that, when released into the environment,
can cause serious danger to the health and life of humans and living organisms. They can lead to numerous health ailments, such as vision,
hearing and speech disorders, and can also damage the kidneys, liver and heart, and cause skin diseases. Harmful substances, can also have
adverse effects on the respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on contaminated
soils, and products made from them, can risk the aforementioned health effects.
3. Waste electrical and electronic equipment should be handed over only to authorized collection points, a list of which should be included on
each Municipality's website.
4. The household plays an important role, in contributing to the reuse and recovery, including recycling, of waste equipment. It also plays a
key role in the waste electrical and electronic equipment management system due to the possibility of direct delivery to authorized collection
points and the elimination of undesirable social habits resulting in leaving waste equipment in places not intended for it.
In addition, Donate waste electrical and electronic equipment at the point of delivery. A distributor, when supplying equipment intended for
households to a purchaser, is obliged to take back used household equipment free of charge at the place of delivery of such equipment,
provided the used equipment is of the same type and performed the same functions as the supplied equipment.
Cardboard packaging and polyethylene (PE) bags should be placed in the appropriate containers for separate collection of municipal waste
according to their description. If there are batteries in the equipment, remove them and separately dispose of them at a collection and storage
facility.
Do not dispose of the device in the municipal waste container!!!
Service If you wish to purchase spare parts or report any complaints, please contact directly with the seller who issued the receipt.
2. Handle
4. On/off switch
6