Seite 19
If the door panel is not properly positioned or angled, follow the steps below for improvement. Step a: Loosen the hinge and adjust the door panel's vertical position. Then, tighten the screws to secure the hinge. Step b: Loosen the middle screw of the hinge and adjust the door panel inwards or outwards to the desired position. Then, tighten the screws to secure the hinge.
Seite 20
Als het deurpaneel niet juist of schuin geplaatst is, volg dan de onderstaande stappen voor verbetering. Stap a: Draai het scharnier los en pas de verticale positie van het deurpaneel aan. Draai vervolgens de schroeven vast om het scharnier vast te zetten.
Si hay alguna pieza defectuosa o falta alguna pieza después de desembalar, interrumpa el 組み立てる前に、必ず部品がすべてそろっていることを確認した上、本書の指示に従って組み立ててくださ montaje inmediatamente y póngase en contacto con nosotros. Los cambios y modificaciones no autorizados pueden afectar a la seguridad. い。不用意・不適切な組み立ては、事故や破損など本体商品の変形につながる恐れがあります。 販売元:ZIELJP株式会社 〒531-0062 ⼤阪市北区⻑柄中3丁⽬6番13号 TEL : 06-7161-1020 info_jp@songmics.jp 2025.02.25-V3...