Inventum IKA8045 Benutzerhandbuch Seite 40

Stopping the cooking timer
1. Touch the + and - buttons simultaneously for 1 second to cancel the cooking timer or decrease the time to "0:00"
using the - button.
POWER MANAGEMENT
• Make sure the appliance is installed and connected according to the separately supplied installation manual.
• It is possible to set a maximum power consumption level for the induction hob, choosing up to 5 different power
ranges.
MAXIMUM POWER
Depending on the electrical connection and the setting of the power management, the appliance has a maximum
power of:
Power
7.400 watts
5.800 watts
4.500 watts
3.500 watts
2.800 watts
When the power management is set, the first cooking zone you turn on will have priority. When the remaining power
is not enough to meet your desired level of following cooking zones, it will default to the maximum level is can be with
the remaining power. If the current remaining power is 0, the operation indicator will show Lt. If you want to turn on
more cooking zones, you need to lower the power level of other cooking zones that are active.
SETTING THE POWER MANAGEMENT
Use the power management mode to set the total maximum power of the appliance.
Note:
As a default, the appliance is set to 7.4 kW. The possible settings are: 2.8, 3.5, 4.5, 5.8 or 7.4 kW.
1. Do not turn on the appliance. Activate the child lock in the power off state.
2. Press the rear left Boost button for 3 seconds. The buzzer sounds.
3. Press the front left Boost button for 3 seconds. The buzzer sounds and the current value appears.
• The letters PO will appear in the operation indicator of the rear left cooking zone.
• The digits 74 will appear in the operation indicator of the front left cooking zone.
• The digits 00 will appear in the operation indicator of the front right cooking zone.
4. Change the value to the correct setting by using the child lock button.
5. Press the on/off button to confirm the setting.
The hob will be turned off.
SET THE HOOD OPERATION MODE
The default mode of the appliance is the air extraction mode. To select the air recirculation mode, follow the next
steps:
1. Make sure that the appliance is in the power-off state.
2. Press the child lock button for 3 seconds. The letter Lo will appear on the operation indicator when the appliance
is locked.
40 • English
Display
PO
PO
PO
PO
PO
74 00
58 00
45 00
35 00
28 00