Replacing The Power Cable Of The Charger; Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling; Storage - Matrix X One Bedienungsanleitung

If the screen of machine does not be shown,
UK
please press the wake button to continue using
all functions, otherwise you can only use the
blowing and inhaling function.
7.Replacing the power cable of the
charger
Danger!
If the power cable for the charger is damaged,
it must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
8. Cleaning, maintenance and ordering
of spare parts
Danger!
Always take the battery out of the equipment
and pull out the power plug before starting any
cleaning work.
8.1 Cleaning
• Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
• We recommend that you clean the device
immediately each time you have finished
using it.
• Clean the equipment regularly with a moist
cloth and some soft soap. Do not use cleaning
agents or solvents; these could attack the plastic
parts of the equipment. Ensure that no water can
seep into the device. The ingress of water into an
electric tool increases the risk of an electric shock.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
14

9. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offices.

10. Storage

Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.